CAD Question
I have a '92 Dakota, 3.9L 4x4. There is a hose that is disconnected and plugged and I cannot find where it goes. I have attached a pic with the hose circled in red. Can anybody enlighten me? ( I borrowed the pic from 4x4troy...I hope he doesn't mind!
)
By memory it will go to the switch on the transfercase then up to the intake manifold, you should have a vacuum diagram sticker under the hood.
Edit: It does looks like the breather hose.
Edit: It does looks like the breather hose.
Last edited by Crazy4x4RT; Sep 11, 2012 at 01:38 AM.
Are you sure its not the breather tube for the axle? Mine has almost the same thing, it runs from the passenger side of the axle up to the frame and is held in place with a clip and has a small breather cap on it. The part to the right of it, that looks round, with 2 hoses coming out of it might be what runs to the transfer case.
Are you sure its not the breather tube for the axle? Mine has almost the same thing, it runs from the passenger side of the axle up to the frame and is held in place with a clip and has a small breather cap on it. The part to the right of it, that looks round, with 2 hoses coming out of it might be what runs to the transfer case.
I think we have a winner!
Are you sure its not the breather tube for the axle? Mine has almost the same thing, it runs from the passenger side of the axle up to the frame and is held in place with a clip and has a small breather cap on it. The part to the right of it, that looks round, with 2 hoses coming out of it might be what runs to the transfer case.
Many thanks to all for the help!!
Multiple gold stars for the part number! Thanks!!!


