My antilock and brake lights stay on after going out after about 15 seconds of the key being turned on. It doesn't have an OBD 1 or 2 connector and I have shorted the pin on the connector on the passenger side kick panel and get code 9. I have replaced the ABS module, speed sensor, master cylinder, metering valve, and bled the brakes. The lights stayed on all the time (never going out at key turn on) until I replaced the ABS module. I have checked the e break switch and the brake light brightens a little whe depressed, indicating it works.
The brakes work fine, I just can't get it inspected with the brake light staying on.
Any suggestions?

 

https://dodgeforum.com/forum/2154414-post2.html

That post will help.