1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

help opening hood

Thread Tools
 
Search this Thread
 
Old Mar 4, 2013 | 07:11 AM
  #1  
vtlogger's Avatar
vtlogger
Thread Starter
|
Rookie
Joined: Jan 2013
Posts: 57
Likes: 0
Default help opening hood

hope some of you can help me out... went to pop the hood on my 95 dakota last night to check the oil ....pulled the hood release and nothing happened .. i think the release cable broke...so what can or do i need to do to get the hood open?? is there a way to pop it going though the grill?? thanks for any help
 
Reply
Old Mar 4, 2013 | 12:10 PM
  #2  
Crazy4x4RT's Avatar
Crazy4x4RT
Hall Of Fame
Joined: Aug 2007
Posts: 10,923
Likes: 19
From: NM
Default

My best suggestion is that maybe the cable broke. I would say try to take apart the handle and see if you can pull out the cable. Then see how long the split is and try to trace it down. You might have to pull the driver tire out and see if you can access the cable housing through there or maybe ever access the latch mechanism.
 
Reply
Old Mar 5, 2013 | 05:15 AM
  #3  
vtlogger's Avatar
vtlogger
Thread Starter
|
Rookie
Joined: Jan 2013
Posts: 57
Likes: 0
Default

GOT IT!!!! not sure how it happened but the cable end pop off the hood release?? but what i did to open it was to go up from under the bumper and using a small but long screw driver i slid it up in to the release catch and just pried it over a little and the hood pop open... ...hope this can help someone out again someday
 
Reply
Old Mar 5, 2013 | 03:58 PM
  #4  
MacDak's Avatar
MacDak
Professional
Joined: Jan 2007
Posts: 243
Likes: 1
From: Red Clay - Georgia
Default

Great, vt!
 
Reply
Old Mar 6, 2013 | 07:09 AM
  #5  
vtlogger's Avatar
vtlogger
Thread Starter
|
Rookie
Joined: Jan 2013
Posts: 57
Likes: 0
Default

thanks!!
 
Reply




All times are GMT -4. The time now is 07:06 AM.