Can a transfer case from an automatic mount to a standard and can you reamove the tail housing on a standard from a 2 wheel drive and mout the transfer case

 

the tail housings on 5spd cant be swappeed. only autos can be. not sure about the transfer case questions though. i would guess that the tc's can be.

 

The bolt pattern will match, but then you have to also have the same size spline shaft, and the proper length input shaft on the transfer case. I believe automatics typically require the shorter input shaft and 5 spds the longer.

2WD trans (auto or 5 spd) won't bolt to a transfer case by swapping out the tail housing, you have to have a 4WD trans.

 

http://mallcrawlin.com/forum/showthr...way!!!-writeup

only works with the autos because they can be split in half

 

Well thanks Shadow, I just learned something. I was told (by someone I thought would know) that to do this would require changing out the main shaft in the automatic - not nearly as simple as swapping tail sections.