1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

dakota no power

Thread Tools
 
Search this Thread
 
  #1  
Old 08-04-2015 | 10:54 PM
Marty_g's Avatar
Marty_g
Thread Starter
|
Registered User
Joined: Mar 2013
Posts: 10
Likes: 0
Default dakota no power

I took my truck to shop cuz no power. it starts idles good for about five min the throtle body starts sucking air like a damn jet engine then get so bad im scared to keep in on. getting no codes thrown out. oh ya the shop said it was my ignition coil thats why i was getting codes at first and my cat was bad. cut cat out and replaced ignition coil. no better it will idle fine for a few the start acting up. i tried to drive it, boggs down like crazy then i can floor it and it will get crazy power then bogg down again. thinking it might be a MAS sensor oh whatever but i looked that up and it doesnt have one. anyways im at a loss any suggestions would be apreciated.
 
  #2  
Old 08-04-2015 | 11:03 PM
RalphP's Avatar
RalphP
Champion
Joined: Jan 2013
Posts: 4,737
Likes: 372
From: Northwest Louisiana
Default

I don't know for sure what you mean by MAS - most Dakotas are old enough, they're SD (Speed Density), and use MAP (Manifold Absolute Pressure) sensor. Newest ones may be MAF (Mass Air Flow).

RwP
 
  #3  
Old 08-05-2015 | 07:34 PM
Marty_g's Avatar
Marty_g
Thread Starter
|
Registered User
Joined: Mar 2013
Posts: 10
Likes: 0
Default

ya thats what i meant the MAF sorry
 
  #4  
Old 08-05-2015 | 10:24 PM
onemore94dak's Avatar
onemore94dak
Champion
Joined: Sep 2013
Posts: 2,540
Likes: 135
Default

How about the Intake Air Control (IAC)?
 



Quick Reply: dakota no power



All times are GMT -4. The time now is 01:06 AM.