1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

6 prin Fuelpump connector HELP!!!

Thread Tools
 
Search this Thread
 
Old Aug 11, 2015 | 11:26 PM
  #1  
Nicholas Bennett's Avatar
Nicholas Bennett
Thread Starter
|
Registered User
Joined: Aug 2015
Posts: 1
Likes: 0
Default 6 prin Fuelpump connector HELP!!!

I have a 1995 dodge Dakota, 2w, v8 magnum, the fuel pump went out so I bought a new one....only problem is my connector has a double stack pin connector. (Three pins on top of three pins) I have went to every part store within my area and no one sales this. Only four or five pins flat. What am I missing!? Someone plz help....
 
Reply
Old Aug 13, 2015 | 08:15 AM
  #2  
93 ragtop's Avatar
93 ragtop
Record Breaker
10 Year Member
Photogenic
Photoriffic
Liked
Joined: Jan 2014
Posts: 1,852
Likes: 109
From: Va
Default

This link may help. http://www.*********.com/forums/showthread.php?t=72807
But, if it was me, I would check with the pump manufacture (on line) verify its the correct pump, and also see if an adapter was supposed to come with it.
Short of that, try another manufacture.
 
Reply
Old Aug 13, 2015 | 09:36 PM
  #3  
onemore94dak's Avatar
onemore94dak
Champion
Photogenic
Photoriffic
Shutterbug
Joined: Sep 2013
Posts: 2,731
Likes: 153
Default

Sounds like you were given the wrong pump.
 
Reply
Old Aug 13, 2015 | 10:57 PM
  #4  
93 ragtop's Avatar
93 ragtop
Record Breaker
10 Year Member
Photogenic
Photoriffic
Liked
Joined: Jan 2014
Posts: 1,852
Likes: 109
From: Va
Default

not sure if this would work, but it looks like what you are describing. http://www.oreillyauto.com/site/c/de...0401&ppt=C0025#


its listed for 96-97 ram trucks.


btw does the old pump have any numbers on it? Also could you post a picture of the old pump
 
Reply




All times are GMT -4. The time now is 04:42 AM.