When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Check Ebay and RockAuto (and Bishko; but Bishko is MSRP, whereas RockAuto is discounted) for paper and PDF-on-DVD for the manual for your truck.
As to the Miller Tool C-4867 - that's no longer in production, but looking at this picture off AutoZone (
) I bet a large spatula would do the trick. I kind of hope so; I've got the opposite problem (can't get the slider installed!!)
On my 87, there are two sliders...one at the top and one at the bottom. So maybe 1 package per door? Or did the cull down to one in later years?
Hrm ... my 1988 only had one that I found. That might explain why it's a bit difficult. (And here I thought it was the rotten channel run that I just haven't gotten around to replacing ... )
So if there are two, then 1 per door, not 1 per truck.
