Thanks. I've got all the part\s ready for tomorrow including a , Borrowing a torque wrench for the T25 torx bits.

Bit conflicting info,. This should be a 46RH transmission.

50 inch pounds fro the T25
7/16 for the pan/gasket at 130inch pounds, 10.18 foot. I've also seen it at 35 foot pounds.
Love to adjust the bands as well.

 

Well went and did the repair work this weekend.

Dual Solenoid was added.
Accumulator Spring replaced. (Old one was broke in two

I'm sorry to say it still stalls out during the first 3 miles of driving.

Now it is shifting better though.

Any other ideas as as to what else needs to be checked.

 

Pull the throttle body, and give it a good cleaning. (leave the battery disconnected while you are doing this.) Once it's back together, turn the key to "On", (not start) count to 10, then start the truck. It will take a little bit to relearn idle. See if its any better.