92 Dakota crank no start
Thread Starter
|
Amateur
Joined: Nov 2012
Posts: 29
Likes: 0
92 Dakota crank no start
Ive been through all the splices on it they all check out good is there a resistance test on both the cam and crank sensors i can do? just replaced the distributor intermediate shaft and bushing what was causing the no start issue before ran a little rough yesterday but ran quit on me was acting like a cam or crank sensor was no good any help is appreciated
Thread Starter
|
Amateur
Joined: Nov 2012
Posts: 29
Likes: 0
It’s got plenty of fuel the coil checks out good I found the pick up and the crank sensor had both been bad I had no tach so I was thinking it was the crank I pulled it last night and it had no continuity whatsoever