1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

Internal Frame Rust Issue

Thread Tools
 
Search this Thread
 
Old Sep 26, 2019 | 06:08 PM
  #11  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,394
Likes: 4,213
From: Clayton MI
Default

Use the respirator as well. We kinda like to keep our membership on THIS side of the grass.
 
Reply
Old Sep 27, 2019 | 04:26 PM
  #12  
onemore94dak's Avatar
onemore94dak
Champion
Photogenic
Photoriffic
Shutterbug
Joined: Sep 2013
Posts: 2,723
Likes: 152
Default

It isn't going to aerosolize in dangerous ways with a spray bottle like you would use for windex but you should use some nitrile gloves, long sleeve shirt and safety glasses. If you get it on your skin or have it in the air too much you'll get a funny metalic taste on your tongue. No tail growing on me yet It isn't the kind of acid that will burn you on contact.
 

Last edited by onemore94dak; Sep 27, 2019 at 04:28 PM.
Reply
Old Oct 3, 2019 | 05:58 PM
  #13  
volaredon's Avatar
volaredon
Record Breaker
15 Year Member
Liked
Loved
Community Favorite
Joined: Apr 2010
Posts: 1,745
Likes: 50
Default

I have a 96 4x4 the back 1/2 of the frame is all scaly I hope next spring to pull the bed and sandblast all of the frame I can then get to (pull the gas tank too) and POR 15 the snot out of it.....have the compressor, the pressure pot sandblaster and everything else I need to do this--- except lately the time. wish I could do this BEFORE this upcoming winter but isn't gonna happen....

No holes, still solid/ front half is very good still....
 
Reply




All times are GMT -4. The time now is 06:31 PM.