Door glass installation
Champion
Joined: Sep 2013
Posts: 2,722
Likes: 152
What truck what year? What arm?
If its a 1st gen dakota you should be able to see what you are working with. If it is a manual crank there are 3 bolts that hold it to the door. Anyway I ended up doing the glass run in this thread and wrote about what I did. I did not remove the glass from the door but it was all the way out of the track. https://dodgeforum.com/forum/1st-gen...ndow-trim.html
If its a 1st gen dakota you should be able to see what you are working with. If it is a manual crank there are 3 bolts that hold it to the door. Anyway I ended up doing the glass run in this thread and wrote about what I did. I did not remove the glass from the door but it was all the way out of the track. https://dodgeforum.com/forum/1st-gen...ndow-trim.html
Thread Starter
|
Registered User
Joined: May 2022
Posts: 2
Likes: 0
What truck what year? What arm?
If its a 1st gen dakota you should be able to see what you are working with. If it is a manual crank there are 3 bolts that hold it to the door. Anyway I ended up doing the glass run in this thread and wrote about what I did. I did not remove the glass from the door but it was all the way out of the track. https://dodgeforum.com/forum/1st-gen...ndow-trim.html
If its a 1st gen dakota you should be able to see what you are working with. If it is a manual crank there are 3 bolts that hold it to the door. Anyway I ended up doing the glass run in this thread and wrote about what I did. I did not remove the glass from the door but it was all the way out of the track. https://dodgeforum.com/forum/1st-gen...ndow-trim.html