95 Dakota power door locks wont work
Thread Starter
Joined: Oct 2006
Posts: 5
Likes: 0
95 Dakota power door locks wont work
My power door locks wont work they just click when I hit the swith. I have replaced both the front and rear speed sensor controls and I have reset the computer and still no luck. Can someone please tell me what i need to do to make the locks work.Thank much.
Champion
Joined: Dec 2003
Posts: 4,119
Likes: 5
From: Sycamore, Illinois (displaced to Arkansas)
RE: 95 Dakota power door locks wont work
Replace the front and rear speed sensor controls, uhh... why?
Anyways, I've attached a copy of the wiring diagram.
Note: you can op's check the motors by direct connecting it to a 12 volt source (and reverse polarity to check operation in the other direction).
[IMG]local://upfiles/948/30666215F05C41ABAD3DE47C7286DCCE.jpg[/IMG]
Anyways, I've attached a copy of the wiring diagram.
Note: you can op's check the motors by direct connecting it to a 12 volt source (and reverse polarity to check operation in the other direction).
[IMG]local://upfiles/948/30666215F05C41ABAD3DE47C7286DCCE.jpg[/IMG]
