1st Gen Durango 1998 - 2003 Durango's

Anyone know what goes on this fitting?

Old Apr 3, 2008 | 11:06 PM
  #11  
rayjj's Avatar
rayjj
Joined: Apr 2008
Posts: 4
Likes: 0
From:
Default RE: Anyone know what goes on this fitting?

Well mine is a NY truck, and I think we pretty much have the 2nd most strict emissions outside of CA. There really were only 2 setups, CA and Federal emissions. Mine has the Federal setup.
 
Reply
Old Apr 7, 2008 | 10:28 AM
  #12  
killerdoberman's Avatar
killerdoberman
Joined: Apr 2008
Posts: 3
Likes: 0
From:
Default RE: Anyone know what goes on this fitting?

ORIGINAL: rgouette

Please tell me this is why I'm getting P1494 & rough starting..?




Or at least what's supposed to go on this guy...
Location: Right on top of intake.
Thanks lads,
Rich
What engine is that?


I have a 5.2 and on the passenger side just below the PCV hose in to the thottle body is a open connection just like this. I put my finger on it while the engine is running, and it does have vacuum. I looked around for an hose to attacha dn I found nothing.

Any ideas?

Same as yours?

I will have to post a pic when I get home tonight.
 
Reply
Old Apr 7, 2008 | 10:58 AM
  #13  
rgouette's Avatar
rgouette
Thread Starter
|
Registered User
Joined: Mar 2008
Posts: 12
Likes: 0
From:
Default RE: Anyone know what goes on this fitting?

this is a 2002 4.7

 
Reply
Old Apr 8, 2008 | 11:39 AM
  #14  
killerdoberman's Avatar
killerdoberman
Joined: Apr 2008
Posts: 3
Likes: 0
From:
Default RE: Anyone know what goes on this fitting?

Here is '99 Durango 5.2.

What is this and why is it empty?





 
Reply
Old Apr 9, 2008 | 09:36 AM
  #15  
psykotic4x4's Avatar
psykotic4x4
Registered User
Joined: Mar 2008
Posts: 7
Likes: 0
From: GA
Default RE: Anyone know what goes on this fitting?

ok killer, my 98 durango just has that line plugged. but a neighbors 98 has a vaccume line running to the power brake booster. id just plug it if theres no line running to it.
 
Reply
Old Apr 9, 2008 | 11:36 AM
  #16  
dwhisnant's Avatar
dwhisnant
Joined: Apr 2008
Posts: 15
Likes: 0
From:
Default RE: Anyone know what goes on this fitting?

Here's the pic from my 99 5.2. It's plugged. Might want to get a plug on it before it sucks in or decreases some other pressure.



[IMG]local://upfiles/87758/4FBF571432D44199A3952BDD71D7410C.jpg[/IMG]
 
Reply
Old Apr 15, 2008 | 03:14 PM
  #17  
killerdoberman's Avatar
killerdoberman
Joined: Apr 2008
Posts: 3
Likes: 0
From:
Default RE: Anyone know what goes on this fitting?

Thanks. I plugged with a couple of layers of duct tape and string. That should hold it until I get a better plug.

And after a couple of days...my higher then normal idle RPMs is dowm to normal. From 1200 to 750-800 in park and 1100 to 600-800 in gear stopped.
 
Reply
Old Apr 15, 2008 | 06:48 PM
  #18  
deerang's Avatar
deerang
All Star
Joined: Sep 2006
Posts: 868
Likes: 0
From: Oshawa, ON, Canada
Default RE: Anyone know what goes on this fitting?

hey killer, it looks like that used to be plugged, I can see a ring around the opening... Your plug prolly just dry rotted, or overheated and cracked off.. good to hear that plugging it has helped
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 07:56 AM.