1st Gen Durango 1998 - 2003 Durango's

Will 35x12.5 tires fit my stock durango?

Old Sep 11, 2008 | 10:00 AM
  #11  
DRO318's Avatar
DRO318
Captain
Joined: Apr 2008
Posts: 579
Likes: 2
From: Dallas, Tx
Default

Hey BO if you are gonna lift it 3 inches Go with 33's man that would look bad A. those 31's would look small like factory small that you may have know. Dude your "D" is going to look killer. on the chip, it is not advised. You see our PCM piggy backs or overrides the chips, then your back to square one again. Dude I'd go with a programmer + you get more options.
 
Reply
Old Sep 11, 2008 | 02:57 PM
  #12  
zach17's Avatar
zach17
Thread Starter
|
Registered User
Joined: Sep 2008
Posts: 6
Likes: 0
Default

Glad this thread has helped more than one person As for the euro tails...they should stay on euro cars IMO. But to each their own!
 
Reply
Old Sep 11, 2008 | 04:35 PM
  #13  
DRO318's Avatar
DRO318
Captain
Joined: Apr 2008
Posts: 579
Likes: 2
From: Dallas, Tx
Default

Yeah man I hope more people post their comments. we have had quite a bit of hits to this thread. Come one come all!
 
Reply
Old Sep 11, 2008 | 05:53 PM
  #14  
wacko's Avatar
wacko
Registered User
Joined: Sep 2008
Posts: 13
Likes: 0
From: Chilliwack BC Canada
Default

What is the largest size wheel you could go with, but still have an off road (Nothing too radical, similar to stock tread) tire? 17", 18" 20"???

I appologize if this is a stupid question. I am not planning on doing any rock crawling, but do do a little backroad camping.
 
Reply
Old Sep 11, 2008 | 06:04 PM
  #15  
DRO318's Avatar
DRO318
Captain
Joined: Apr 2008
Posts: 579
Likes: 2
From: Dallas, Tx
Default

Say bo that is not a stupid question. that is one of the many questions I have been waiting to answer. 3 inch lift- 20' with 33's you plan to still have the off road look. I will post pics in a moment.
 
Reply
Old Sep 11, 2008 | 06:28 PM
  #16  
DRO318's Avatar
DRO318
Captain
Joined: Apr 2008
Posts: 579
Likes: 2
From: Dallas, Tx
Default

3" FABTECH SUSPENSION LIFT
3" PERFORMANCE ACCESSORIES BODY LIFT
2" REAR LIFT SHACKLES
33" TSL SUPER SWAMPER IROK RADIALS
20" WIRED WHEELS


3inch Body lift with 1 inch shackle and torsion bar lift.
20 MB Motoring rims wrapped in 33inch Nitto Mud Grapplers


And last 22with 305/40r22 tires. not really off rad but still bad A.
 
Reply
Old Sep 11, 2008 | 06:39 PM
  #17  
wacko's Avatar
wacko
Registered User
Joined: Sep 2008
Posts: 13
Likes: 0
From: Chilliwack BC Canada
Default

Those look pretty sweet. Would I be able to put the 3" body lift in myself in my garage? Any special tools needed? Or how much would a shop charge?

Also what about without the body lift, what is the biggest wheel you could go with and a lower profile m/s tire?
 
Reply
Old Sep 11, 2008 | 07:04 PM
  #18  
DRO318's Avatar
DRO318
Captain
Joined: Apr 2008
Posts: 579
Likes: 2
From: Dallas, Tx
Default

That last pic with the 22's is ideal, I have 275/45/20's yeah that is at stock height. You can go 24's with low profile tires, flats and skinnys are their nick names. This is not advised because that thin of a tire would not be a good for a everyday driver. pot holes and bumps on the road are their worst enemy.
lowered 2 inches

stock height
 
Reply
Old Sep 12, 2008 | 09:13 AM
  #19  
hydrashocker's Avatar
hydrashocker
Hall Of Fame
20 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Jun 2005
Posts: 14,228
Likes: 19
From: Riverton, UT
Default

Damn!

Dude you can find the pic's......

The Green one (first one) is just flat out sick.
 
Reply
Old Sep 12, 2008 | 09:16 AM
  #20  
DRO318's Avatar
DRO318
Captain
Joined: Apr 2008
Posts: 579
Likes: 2
From: Dallas, Tx
Default

Yeah that was for sale. he already sold it though. that's the look that I want to go for. except the doors
 
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 03:06 PM.