13-4100 is the Superior Auto number... Call up an Autozone and check for stock!

And rebel.... Did you have to put washers in there at all?

 

Nice!

The Superior 13-4100 shakles looks like it would work but I would like to see em in person. I like they have poly bushings in them as well!

 

Yep! Poly bushings... I just had to go out and get 8 thick, 1/2" washers... Installed everything last night and it was close to a 3" lift! I think that probably went down a bit after I cranked the torsion bars... I could only get 6 full turns out of the passenger side because I was so tired from putting the hitch back on... So, later on I will do the extra two... I got 1.5" out of doing the front torsion bars...

Now for today's quest... Finding out why my fogs don't work after doing the fog light mod! I am going to say burnt headlight switch! Fuse is good, no relay, not getting any voltage at the fuse at all... Tells me a bad headlight switch... So, beware of the foglight mod for now!

 

are these new ones behind the counter? I've check the 4 autozones we have here and the only ones they have on shelf are the crappy bar ones ?

 

Nah, mine were on the shelf... Go in and ask for Superior Automotive p/n 13-4100...

 

The fog light mod is different for different years.

Glad to see everything is working out!

 

Found the problem with the fogs... Opened the switch and the contacts for the fog lights were non-existent! WTF? Wasn't even rattling around inside the switch or anything! Got a new one at a wrecking yard and works great now!

As for pictures, sorry I haven't posted any yet... My mother in law was in the hospital since Sunday and passed away 3/19/09 at 10:10 PM... Haven't had any time to get pics...

 

Talk about a burn out!

Nice to here you got it.

 

so just to make sure, all you needed was a 30-somethin dollar kit from autozone and 8 washers? i think i found my next project for the durbango...

 

I would get an extra two washers... IIRC they are 1/2" washers... The extra two would be for the bottom bolts as the shackles bents just VERY slightly...