Window Clips
#1
#2
I need two door window mounting clips for my regulator.I`ve found a couple of suppliers but you either buy 2000 or pay $12 for two plus another $13 for shipping.I tried JB Welding them but they broke again 2 months later.If anyone has them setting around,please let me know.
#3
I have changed my front driver side window regulator out and I throwed out the part that screws or clips the window onto the regulator sliding mechanism/trolley. Im now left with my window just laying in the 2 90 degree fingers where the clip for the window use to lay. Doesnt work very well this way at all without the window clip. I was told by a dealership I may have to buy a new window to get the clip. I have done exhausting research looking for this clip. Please, please, if anyone has a picture of this thing, knows where I can get one let me know. It has been a real pain in the butt.
Last edited by shagmanjug; 06-22-2010 at 10:40 PM. Reason: update
#5
Youc an purchase a complete assembly with motor for around $50-$70 for each window. You never know what the condition of the clips are if you pulled them from a used assembly and it may put you back to square one and you have to tear down all over again to fix. Just spend the extra money to get a new complete assembly and be done with it. Wished I could find an assembly without the motor. Would save quite a bit of money.
#6
#7
I have purchased a full regulator assembly from advance auto 4 months ago and have had to return it 3 times due to the aftermarket one failing. Not one of these full assemblies came with the part that attaches to the window that in turn screws to the regulator trolley mechanism. I believe the best solution is from what another said by just going to a junk yard and pulling one from a salvaged vehicle.