1st Gen Durango 1998 - 2003 Durango's

Front end troubles

Thread Tools
 
Search this Thread
 
  #1  
Old 11-06-2009 | 12:03 AM
DEBJIM21's Avatar
DEBJIM21
Thread Starter
|
Registered User
Joined: Nov 2009
Posts: 2
Likes: 0
Default Front end troubles

Got an 03 durnago slt awd making a whurring grinding noise in the front end . All cv boots lok good. New brakes and rotors. Stops making the noise when making sharp to moderatly sharp right hand turns
 
  #2  
Old 11-06-2009 | 08:38 AM
1969CoronetR/T's Avatar
1969CoronetR/T
vaffanculo
Joined: Oct 2008
Posts: 7,957
Likes: 6
From: Pittsburgh, PA
Default

Repost this in the first generation Durango section as this is the general forum,
FF
 
  #3  
Old 11-21-2009 | 04:29 PM
hydrashocker's Avatar
hydrashocker
Hall Of Fame
Joined: Jun 2005
Posts: 14,228
Likes: 17
From: Riverton, UT
Default

Posting in the middle subsections is no-mans-land. Try here: 1st Gen Durango


I'll move this for you.
 
  #4  
Old 11-23-2009 | 12:56 AM
rebelboy's Avatar
rebelboy
Veteran
Joined: Feb 2008
Posts: 336
Likes: 0
From: carver,ma
Default

wheel bearing lift the front end off the ground wiggle the wheel in all direction if theirs play in all directions you need hubs/wheel bearings post back with any questions
 
  #5  
Old 11-24-2009 | 12:31 PM
hydrashocker's Avatar
hydrashocker
Hall Of Fame
Joined: Jun 2005
Posts: 14,228
Likes: 17
From: Riverton, UT
Default

+1 rebel. Wheel bearing!
 
  #6  
Old 11-24-2009 | 12:46 PM
Dans01Durango's Avatar
Dans01Durango
Record Breaker
Joined: Dec 2006
Posts: 1,508
Likes: 3
From: NY NY
Default

+2 Wheel bearing. I had a mitsu gallant and it had a bad bearing. Took that sucker for a long trip (500+) and when I came back the whirring was worse. Got it to the mech and they told me the bearing was seizing up. He was surprised it lasted the trip! So was I!
 



Quick Reply: Front end troubles



All times are GMT -4. The time now is 11:33 AM.