1st Gen Durango 1998 - 2003 Durango's

Torque converter stays locked up when put in drive an kills engine

Thread Tools
 
Search this Thread
 
  #1  
Old 01-06-2011, 04:01 PM
brians1bad72's Avatar
brians1bad72
brians1bad72 is offline
Registered User
Thread Starter
Join Date: Sep 2009
Posts: 26
Likes: 0
Received 0 Likes on 0 Posts
Default Torque converter stays locked up when put in drive an kills engine

I have a 2000 Durango 5.9L, having trans. problem. I start the truck put it in drive and I hear this weird buzzing or growling sound like the converter is not disengaging, and sometimes the engine dies. Also when I drive in Reverse it will buck sometimes. Anyone had this type of problem before? thanks. Also the trans. fluid is dirty looking, but does not smell burnt.
 

Last edited by brians1bad72; 01-06-2011 at 04:03 PM.
  #2  
Old 01-06-2011, 05:10 PM
bowhuntmaine's Avatar
bowhuntmaine
bowhuntmaine is offline
Professional
Join Date: Dec 2010
Location: illinois
Posts: 128
Likes: 0
Received 0 Likes on 0 Posts
Default

My 99 did that, i ended up putting in a rebuilt trans.
 
  #3  
Old 01-06-2011, 06:00 PM
bowhuntmaine's Avatar
bowhuntmaine
bowhuntmaine is offline
Professional
Join Date: Dec 2010
Location: illinois
Posts: 128
Likes: 0
Received 0 Likes on 0 Posts
Default

Sorry, that seamed kinda short. mine would only do every so often. i had it towed 3-4 times cuz it kept bucking and stalling in reverse.when they dropped the pan it had soft part sludge in the bottom,thats when i knew it was only a matter of time. i'd take it to ur garage and see what they can do. as i found out, by the time u hear it, its to late. when they diagnose it, i hope its something simple.
 
  #4  
Old 01-07-2011, 10:46 AM
Dans01Durango's Avatar
Dans01Durango
Dans01Durango is offline
Record Breaker
Join Date: Dec 2006
Location: NY NY
Posts: 1,508
Likes: 0
Received 2 Likes on 2 Posts
Default

When was the last time your tranny was serviced? Or even the tranny fluid and filter has been changed? Could be time for a fluid and filter change with band adjustment.
 
  #5  
Old 01-07-2011, 05:56 PM
brians1bad72's Avatar
brians1bad72
brians1bad72 is offline
Registered User
Thread Starter
Join Date: Sep 2009
Posts: 26
Likes: 0
Received 0 Likes on 0 Posts
Default

I ran the truck today up on jack stands, when you put it in gear foot on the brake the growling noise is heard, I went under the truck and the noise is diffenantly comming from the converter, it sounds like there is sand or a grumbuling sound. I suspect the converter is shot, looks like its time for a rebuild! Sucks
 



Quick Reply: Torque converter stays locked up when put in drive an kills engine



All times are GMT -4. The time now is 04:05 PM.