I wish we had an autozone here in Canada.

 

Well just take it to the parts store, you know what I mean.


Also, you should replace the lower radiator hose, by pass hose, and upper radiator hose with a 180 degree T-stat while your there. When installing the heater hose off the pump you want to use the new O ring that comes in the kit and I would put just a very fine film of RTV on the walls of the pump where it plugs in when you go to install it just to help lubricate the O ring down the hole and plug any possible leak. Now you don't need to use it, but you should at least lubricate it with something ya know. Yes it just sits in there. Also get a brand new pump, not a rebuild!

 

+1 for new pump over rebuild

 

Okay went to change the waterpump and finally got it off but the metal pipe coming out of it that goes to the heater core is rusted clean through. What is this called? Where can I get it?

 

This?... http://www.autozone.com/autozone/par.../N-j9rxiZ9pego

 

Is there a parts place in Canada or that ships here?

 

www.rockauto.com
1998 DODGE DURANGO 5.9L 360cid V8 MFI (Z) OHV : Cooling System : Water Pump Inlet Tube WikiPriceDORMAN Part # 56399 {#55036160} Heater Bypass Tube Located in water pump

CAD$7.07Add to Cart

 

Thanks for the link but the shipping is $24.

 

your new pump didn't come with that pipe?

 

No the pump didn't come with it. In fact, it isn't even listed on the dealer waterpump diagram.