1st Gen Durango 1998 - 2003 Durango's

No Go Durango

Thread Tools
 
Search this Thread
 
Old Sep 4, 2005 | 06:42 PM
  #11  
Pasolo's Avatar
Pasolo
Joined: Sep 2005
Posts: 7
Likes: 0
From:
Default Super chip Durango

Have you tried any other programmable chip, and is the super chip difficult to program I am thinking of getting the same P chip for my 98 D
 
Reply
Old Sep 4, 2005 | 11:11 PM
  #12  
Kensai's Avatar
Kensai
Champion
20 Year Member
Photogenic
Joined: Dec 2003
Posts: 2,707
Likes: 4
From: Dallas, Tx
Default RE: Super chip Durango

From what I heard, both hypertech and superchip programmers are very easy. Just answer "yes" or "no" to the questions ask of you and that's it.
 
Reply
Old Sep 5, 2005 | 02:40 AM
  #13  
hydrashocker's Avatar
hydrashocker
Hall Of Fame
20 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Jun 2005
Posts: 14,228
Likes: 19
From: Riverton, UT
Default RE: Super chip Durango

Hypertech Power Programer III is the way to go. I have done research on these programers and found that this little peace of equipment has all the tricks you need and very easy to read. Just make sure your battery is fully charged before you start reprogramming your truck.
 
Reply
Old Oct 31, 2005 | 01:22 PM
  #14  
Digitoxin's Avatar
Digitoxin
Professional
Joined: May 2005
Posts: 229
Likes: 0
From: California
Default RE: No Go Durango

OK, I have checked my gas milage after driving with the superchip programmer
in the highest performance setting. I filled it up, went 262.5 miles, city driving mainly
and filled it up again after about a month.( I dont drive it everyday.) It took 18.5 gallons
of gas to fill it again. So I got 14.1 MPG. That is up from the 13.2 MPG I was getting
before the programmer. Not a lot of difference. but I'll take it.
 
Reply
Old Oct 27, 2006 | 02:11 PM
  #15  
yzdodge's Avatar
yzdodge
Joined: Sep 2006
Posts: 1
Likes: 0
Default RE: No Go Durango

I got 18 miles to the gallon after the using the programer but it was mostly highway with the cruise on 65
 
Reply




All times are GMT -4. The time now is 11:08 AM.