Greetings and thanks to all first and foremost. This is my first post to this Forum, so pardon my ignorance if this is a common question.
I have picked up a 99 Dodge Durango SLT that needs some work. The front right passenger fender needs to be replaced. I have pulled the part from a 98 Durango and was wondering if these parts are compatible. To look at them I'd say yes, but I don't want to pull the damaged part only to find that the replacement will not go on.
Thanks again!

A

 

Should fit without a problem, welcome aboard.

 

Well thanks for the quick response, all the research I have done up till now says the same. That this part should fit. Funny, your posted photo is the color of the replacement fender I pulled at local U pick/pull junkyard. I'll let you know how it goes!
Thanks again..

 

yeah... should be as simple as just unbolt and bolt it back on... pretty simple... once you get to 2000 though i believe there are some minute differences

 

Pretty much anything 98-03 will fit or can be made to fit with alittle time and elbow greese

 

Thanks, good to know. I will put up pics of before and after once I can get my pics small enough to upload them...(Jeez)
Lates,
A

 

upload them to photobucket or similar and use the [img] [/img] tag line to copy/past and display them in the forum.

 

Here is the truck after missing a deer but scraping a pole:

Got the replacement painted and is curing, hope to have a more complete update on it tomorrow:

 

How much of a PIA is it to take the fender off. I have to replace the drivers side. and I also have a few MOD ideas that require it.

 

Welcome to the forum!

Yes, a 1998 and 1999 are the same. The differences came in 2000+ so you should be just fine.