1st Gen Durango 1998 - 2003 Durango's

Did brake lines every change?

Thread Tools
 
Search this Thread
 
Old Feb 24, 2012 | 04:17 PM
  #1  
RollerRed's Avatar
RollerRed
Thread Starter
|
Veteran
Joined: Oct 2011
Posts: 395
Likes: 0
From: Milton, Wa
Default Did brake lines every change?

I am looking to get new brake lines and was wondering if there was a big difference between 00 and 98 brake lines? Like did they change or is there a different connector piece etc.
 
Reply
Old Feb 25, 2012 | 11:02 AM
  #2  
RollerRed's Avatar
RollerRed
Thread Starter
|
Veteran
Joined: Oct 2011
Posts: 395
Likes: 0
From: Milton, Wa
Default

No one?
 
Reply
Old Feb 25, 2012 | 11:31 AM
  #3  
topdogcustoms's Avatar
topdogcustoms
Captain
Joined: Dec 2010
Posts: 560
Likes: 1
From: Tempe,Az
Default

the 98 is 9.5" long and the 2000 is 11.625" long other then the length there the same
 
Reply
Old Feb 25, 2012 | 06:27 PM
  #4  
RollerRed's Avatar
RollerRed
Thread Starter
|
Veteran
Joined: Oct 2011
Posts: 395
Likes: 0
From: Milton, Wa
Default

Well that shouldn't be to much of a problem I dont think.
 
Reply
Old Feb 25, 2012 | 09:47 PM
  #5  
shrpshtr325's Avatar
shrpshtr325
THE ULTI-MOD
15 Year Member
Photogenic
Photoriffic
Liked
Joined: Jan 2007
Posts: 19,797
Likes: 36
From: Union NJ
Default

are you referring to the hard lines or the soft lines?

since the banjo bolt at the caliper changed somewhere along the line the connection to the caliper through the banjo bolt also had to change, im not sure when this change happened (this is a change in the soft lines, not sure about the hard lines)
 
Reply
Old Feb 25, 2012 | 10:07 PM
  #6  
topdogcustoms's Avatar
topdogcustoms
Captain
Joined: Dec 2010
Posts: 560
Likes: 1
From: Tempe,Az
Default

this is for a 98


Part Number:
78702
Weight:
0.7 lbs
Warranty:
3 MO
Notes:
Driver sideMay require hose lock replacement, part number H1457A
Bracket Material:
Stamped Steel
Brake Hose Assembly Length (In):
9.5
Brake Hose Assembly Segment 2 Length (In):
9.25
End 1 Fitting Material:
Treated Steel
End 1 Type/Size of Fitting:
Banjo - 10 mm
End 2 Fitting Material:
Treated Steel
End 2 Type/Size of Fitting:
Female - M10 x 1.0
Gaskets Included:
Yes
Hose Material:
EPDM Rubber
Installation Hardware Included:
No
Location:
Driver Front
Package Contents:
Brake Hose, Gaskets
Shipping Information:
Overnight and Two Day shipping are not available for PO Box, APO/FPO/DPO or US Territory addresses.



and a 2000



Part Number:
70802
Weight:
0.7 lbs
Warranty:
3 MO
Notes:
Driver sideMay require hose lock replacement, part number H1457A
Bracket Material:
No Bracket Required
Brake Hose Assembly Length (In):
11.625
Brake Hose Assembly Segment 2 Length (In):
12.625
End 1 Fitting Material:
Treated Steel
End 1 Type/Size of Fitting:
Banjo - 10 mm
End 2 Fitting Material:
Treated Steel
End 2 Type/Size of Fitting:
Female - M10 x 1.0
Gaskets Included:
Yes
Hose Material:
EPDM Rubber
Installation Hardware Included:
No
Location:
Driver Front
Package Contents:
Brake Hose, Gaskets
Shipping Information:
Overnight and Two Day shipping are not available for PO Box, APO/FPO/DPO or US Territory addresses.
 
Reply
Old Feb 26, 2012 | 12:37 PM
  #7  
RollerRed's Avatar
RollerRed
Thread Starter
|
Veteran
Joined: Oct 2011
Posts: 395
Likes: 0
From: Milton, Wa
Default

Just the soft lines. I checked the hard line and it looks newer and nothing is wrong there. But I need to change the soft lines out. I guess there are only three lines. I was just going to go SS and call it good.
Which is why I asked because they only make them for 2000-2003. I emailed the company and they said they would be alittle longer but would work. So I wanted to double check on here.
 
Reply




All times are GMT -4. The time now is 06:19 AM.