99 dodge durango 4X2 5.2 318. I need to replace my sway bar bushings. What size is the stock front sway bar? I will also be replacing upper and lower control arm bushings. When I reinstall my upper and lower control arms do the bolts need to be torqued?

 

My sway bar diameter for the same vehicle (99, 2wd, 318) was the 34.5 mm one. But I would get under there and measure it with a caliper just to make sure. There seems to be plenty of different sway bar diameters.

Upper control arm:
Pivot shaft nuts - 130 ft. lbs.
Pivot shaft to frame nuts - 155 ft. lbs.

Lower control arm:
Front nut - 130 ft. lbs.
Rear nut - 80 ft. lbs.