1st Gen Durango 1998 - 2003 Durango's

2001 dodge durango rear passanger window motor

Thread Tools
 
Search this Thread
 
Old Jul 2, 2012 | 04:52 PM
  #1  
robrobins76's Avatar
robrobins76
Thread Starter
|
Registered User
Joined: Jul 2012
Posts: 1
Likes: 0
Default 2001 dodge durango rear passanger window motor

I thought the window came off track,but took off panel and see window on track. Hit the button the motor moves ,but window does not . Do i need a new motor or am i not connected somewhere? DK what to check next
 
Reply
Old Jul 2, 2012 | 06:41 PM
  #2  
TravisN.'s Avatar
TravisN.
Rookie
Joined: Jun 2012
Posts: 99
Likes: 0
From: S. Fla
Default

Two cables come out of the motor, 1 pulls down, the other pulls up. If the cable moves with the motor, it may have been diconnected where it attaches to the window. If the cable doesnt move, the motor is disconnected from the cable. More than likely a new power window regulator is needed.
 
Reply
Old Jul 2, 2012 | 07:22 PM
  #3  
topdogcustoms's Avatar
topdogcustoms
Captain
Joined: Dec 2010
Posts: 560
Likes: 1
From: Tempe,Az
Default

Originally Posted by TravisN.
Two cables come out of the motor, 1 pulls down, the other pulls up. If the cable moves with the motor, it may have been diconnected where it attaches to the window. If the cable doesnt move, the motor is disconnected from the cable. More than likely a new power window regulator is needed.
+1 the Window Regulator is out
 
Reply




All times are GMT -4. The time now is 03:53 AM.