1st Gen Durango 1998 - 2003 Durango's

2000 durango wont start

Thread Tools
 
Search this Thread
 
Old Oct 12, 2012 | 11:27 AM
  #11  
b1llyw's Avatar
b1llyw
Professional
Joined: Dec 2008
Posts: 129
Likes: 1
Default

Check the ignition coil.
 
Reply
Old Oct 13, 2012 | 12:51 AM
  #12  
5.9's Avatar
5.9
Thread Starter
|
Registered User
Joined: Sep 2012
Posts: 9
Likes: 0
Default

Originally Posted by shrpshtr325
have you checked for spark yet? i dont mean w/ a timing light, pull a wire and put a plug in it, hold it to the block, what do you see? if the spark is not nice and strong id look at coil, wires or distributor cap/rotor

nope i have not done that ive only checked with my light. i can do that. ill check that way
 
Reply
Old Oct 13, 2012 | 12:52 AM
  #13  
5.9's Avatar
5.9
Thread Starter
|
Registered User
Joined: Sep 2012
Posts: 9
Likes: 0
Default

Originally Posted by b1llyw
Check the ignition coil.
that has allready been replace with a new one
 
Reply
Old Oct 13, 2012 | 07:00 AM
  #14  
b1llyw's Avatar
b1llyw
Professional
Joined: Dec 2008
Posts: 129
Likes: 1
Default

Sorry, missed that. Have you checked all your grounds?
 
Reply
Old Oct 15, 2012 | 09:10 PM
  #15  
5.9's Avatar
5.9
Thread Starter
|
Registered User
Joined: Sep 2012
Posts: 9
Likes: 0
Default

i do have spark at the plug, checked the dizzy at tdc and its pointing at number 1. so i dont know. i had my buddy come out with his snap on scope and all it said was throttle positin sensor getting 3 volts putting it in flood mode. what does that all mean? i think its something internaly because the more i crank it the more gas i get in the oil. any ideas?
 
Reply




All times are GMT -4. The time now is 02:08 PM.