2003 durango
Thread Starter
|
New Member
Joined: Jan 2014
Posts: 1
Likes: 0
2003 durango
My durango wont stay started there gas in it but wont stay idling if u press on the gas it will stay started but once you let go it dies. And the has pedel wont go to the floor either..please help
Champion
Joined: Jan 2011
Posts: 4,099
Likes: 44
From: Pittsburgh, PA or Columbia, SC
For the stalling it's most likely either the battery/battery connections (corroded/dirty) or the IAC valve. If the pedal isn't going all the way down I'd look at the linkage for possible obstructions.
Hall Of Fame
Joined: Jun 2005
Posts: 14,228
Likes: 19
From: Riverton, UT
And the has pedel wont go to the floor either..please help
Come on guys if you actually read the OP's question he says there is a problem with the petal travel. Open the hood and remove the air hose/hat and see what is happening with your linkage. If all is well then you need a new gas petal cable and most likely a new TPS. Also clean the Throttle Body out while your there by removing it and clean it with 2 cans of throttle body cleaner and a tooth brush. Remember to clean out all the ports.
