When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have removed the front drivers side axle before, and it was very difficult to get out. I need to do it again and was wondering if anyone knows any tricks? It's a 2003 Durango with 4WD.
Last edited by 400m; 03-16-2015 at 05:48 PM.
Reason: Left out model info
There is a retaining ring and groove that holds it in and the only way I ever got em out was to just pry and smack it with a hammer while prying it should jump out of the groove holding it hopefully. If its corroded in try some penetrating fluid.
Well, it took two people. What we did was just as dxloat suggested. Penetrating fluid first, then one of us put outward pressure on it with a long pry bar, while another kept smacking the axle with a 2# hammer. It finally gave. Thanks everyone.