1st Gen Durango 1998 - 2003 Durango's

No buss no p codes engine just turns off 02 durango

Thread Tools
 
Search this Thread
 
  #1  
Old 11-12-2017, 06:00 PM
Porkbut's Avatar
Porkbut
Porkbut is offline
Registered User
Thread Starter
Join Date: Nov 2017
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Exclamation No buss no p codes engine just turns off 02 durango

i have a 2002 Durango the thing will just die and turn off no fault codes except no buss on odometer. New tps map sensor ias cam and crank sensor. When it dies I have 5 volts on all sensors, 48 psi fuel pressure 12.9 Vdc on battery alt putting out 40 amps with everything on. I’m lost, the engine relay is good, fuel relay good. It’s a 4.7 4wd. Transmission filter just changed. Please help!!! Looked for air leaks, wire shorts nothing found.
 
  #2  
Old 11-13-2017, 01:36 PM
MoparFanatic21's Avatar
MoparFanatic21
MoparFanatic21 is offline
Legend
Join Date: Nov 2014
Posts: 8,032
Received 306 Likes on 298 Posts
Default

When "No Buss" appears that means the computer is going out.
 
  #3  
Old 11-13-2017, 05:41 PM
Porkbut's Avatar
Porkbut
Porkbut is offline
Registered User
Thread Starter
Join Date: Nov 2017
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks that’s what I thought
 
  #4  
Old 11-13-2017, 08:02 PM
TNtech's Avatar
TNtech
TNtech is offline
Site Moderator-Dodge Tech
Dodge Forum Moderator
Join Date: Sep 2010
Location: Nashville, Tennessee
Posts: 3,725
Received 18 Likes on 16 Posts
Default

Wiggle the PCM connectors and see if you can duplicate the problem.

If it only happens when the engine is hot, I would start with cam AND crank sensors.
 
  #5  
Old 11-16-2017, 08:51 PM
Porkbut's Avatar
Porkbut
Porkbut is offline
Registered User
Thread Starter
Join Date: Nov 2017
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks for the help, it was the pcm. Changed it out drives like a new one thank you...
 




All times are GMT -4. The time now is 10:20 AM.