When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a 2001 Dodge Durango SLT 4 by 4 5.9 liter I was wondering if I could swap out front hub assembly in the rear end from my Durango to a Dodge Dakota or Ram that is 5 lug would this be possible I know from 98 to 03 most parts are interchangeable
I've been wondering the same about the front hubs. The Dakotas of same year range are the same 6 lug pattern as our Durangos so you'd be looking at a ram. My buddy measured his 9.25 out of his ram withe drum brakes and told me it measured 69 1/2 inches drum to drum. So if the Durangos axle is same width I imagine you could get shafts out of the salvage yard and slide them in then just have to worry about the front hubs
My reason would be because it opens up opportunities for a SAS with matching lug patterns without replacing rear axle. I don't know for the OP though. Maybe more wheel options? Only thing I can think of
I can not find rims for my car at all they want a couple hundred extra to custom drill it because it a weird lug pattern so I figured it would be easier to switch hub assemblies and rear axle I live in Texas and I've looked everywhere nobody has anything and I do not want to use wheel adapters
I have clear halo headlights LED headlights 2 inch lift blue and the grill under glove wheel wells and inside custom turn signals has 20 inch rims that came with the car but I want to go bigger