1st Gen Durango 1998 - 2003 Durango's

2000 Durango engine swap 4.7 to 5.2

Thread Tools
 
Search this Thread
 
Old Mar 23, 2006 | 12:31 AM
  #1  
rolstan2's Avatar
rolstan2
Thread Starter
Joined: Mar 2006
Posts: 2
Likes: 0
Default 2000 Durango engine swap 4.7 to 5.2

Hello folks, My mother in law has a 2000 durango with a blown 4.7 engine on an auto trans. will a 5.2L fit in it on that same trans? And all the computer stuff work? Thanks
 
Reply
Old Mar 23, 2006 | 01:46 PM
  #2  
89Daytona's Avatar
89Daytona
Veteran
Joined: Dec 2005
Posts: 317
Likes: 0
From:
Default RE: 2000 Durango engine swap 4.7 to 5.2

The 4.7L uses a different transmission than the 5.2L
http://www.allpar.com/model/durango-2004.html
http://www.allpar.com/model/durango-...owertrain.html
http://www.allpar.com/mopar/47.html
http://www.allpar.com/mopar/318.html

The engines also have a bunch of electrical differences, I doubt you would be able to use the same electronics on the 5.2 as on the 4.7L.

You would probably be better off pulling the engine out and reabuilding (depending on what killed the engine) it then putting it back in. Or you might be able to get a 4.7 from a junkyard fairly cheap seeing as the engine has been around since 1999.
 
Reply
Old Mar 24, 2006 | 12:21 AM
  #3  
rolstan2's Avatar
rolstan2
Thread Starter
Joined: Mar 2006
Posts: 2
Likes: 0
Default RE: 2000 Durango engine swap 4.7 to 5.2

Thanks for the info, was hoping it would give us more options. But oh well, 4.7 it is then. Thanks again
 
Reply
Old Mar 26, 2006 | 09:56 PM
  #4  
hydrashocker's Avatar
hydrashocker
Hall Of Fame
20 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Jun 2005
Posts: 14,228
Likes: 19
From: Riverton, UT
Default RE: 2000 Durango engine swap 4.7 to 5.2

Definitely rebuild the same motor or different 4.7L. You are talking about throwing allot of money into it for not much power ratio.
 
Reply




All times are GMT -4. The time now is 02:12 AM.