1st Gen Durango 1998 - 2003 Durango's

code p0302

Thread Tools
 
Search this Thread
 
Old Jan 11, 2007 | 04:32 PM
  #1  
kevmic28's Avatar
kevmic28
Thread Starter
|
Rookie
Joined: Dec 2004
Posts: 51
Likes: 0
Default code p0302

I have an intermittent missing. I pulled a code 302 when the check engine light came on. I have changed the cap and rotor and the plugs. I have 95000 miles on the truck and I am sure this is the first time the plugs and cap have been changed. I will change the plug wires out tomorrow and see if that fixes it. Any other ideas would be greatly appreciated/
 
Reply
Old Jan 12, 2007 | 04:03 AM
  #2  
myns's Avatar
myns
Rookie
Joined: Jan 2007
Posts: 61
Likes: 0
From:
Default RE: code p0302

really stupid question you did clear the computer after you changed all that
 
Reply
Old Jan 12, 2007 | 05:01 PM
  #3  
kevmic28's Avatar
kevmic28
Thread Starter
|
Rookie
Joined: Dec 2004
Posts: 51
Likes: 0
Default RE: code p0302

Not a stupid question. But yes I did clear the computer.
 
Reply
Old Jan 12, 2007 | 09:08 PM
  #4  
myns's Avatar
myns
Rookie
Joined: Jan 2007
Posts: 61
Likes: 0
From:
Default RE: code p0302

haveyou tryed checkingchecking number two cylinder for spark if ur getting spark to the end of the wire then i might be a bad or dirty injector
 
Reply
Old Jan 13, 2007 | 11:21 PM
  #5  
kevmic28's Avatar
kevmic28
Thread Starter
|
Rookie
Joined: Dec 2004
Posts: 51
Likes: 0
Default RE: code p0302

I figured out that the spark plug wire was on the the exhaust pipe. I will replace the wires tomorrow.
 
Reply
Old Jan 14, 2007 | 01:12 AM
  #6  
chfjim's Avatar
chfjim
Veteran
Joined: Mar 2004
Posts: 299
Likes: 0
From:
Default RE: code p0302

There was a recall on something with that call coming up frequently. I have the same thing on mine and dealer fixed no charge!
 
Reply
Old Jan 14, 2007 | 01:34 PM
  #7  
hydrashocker's Avatar
hydrashocker
Hall Of Fame
20 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Jun 2005
Posts: 14,228
Likes: 19
From: Riverton, UT
Default RE: code p0302

God created the Hemi but mine does just fine.
 
Reply
Old Jan 16, 2007 | 01:39 PM
  #8  
kevmic28's Avatar
kevmic28
Thread Starter
|
Rookie
Joined: Dec 2004
Posts: 51
Likes: 0
Default RE: code p0302

I replaced the wires and she runs great. Amazing what a tune up will do. 95000 miles and the wires finally broke down. Plugs actually looked good still.
 
Reply
Old Jan 16, 2007 | 01:44 PM
  #9  
Mean Green's Avatar
Mean Green
Champion
Joined: Jun 2006
Posts: 4,186
Likes: 2
From: Reno, NV
Default RE: code p0302

You ran the stock wires for 95k?!?! That's quality right there but you'll save some gas now with the new ones. Might as well change the distributor as well if you haven't. I can't wait to get back ahead of myself with the bills that came with my move. I want to get my t/s lift, flowmaster, and MSD ignition components.
 
Reply
Old Jan 17, 2007 | 07:49 PM
  #10  
steve05ram360's Avatar
steve05ram360
Hall Of Fame
20 Year Member
Liked
Loved
Community Favorite
Joined: Jan 2004
Posts: 12,946
Likes: 309
Default RE: code p0302

maybe it's time to clean the o2's also??? preventive maint goes a long way.
 
Reply




All times are GMT -4. The time now is 01:23 PM.