1st Gen Durango 1998 - 2003 Durango's

Engine Light P0358

Thread Tools
 
Search this Thread
 
Old Mar 19, 2007 | 07:12 PM
  #1  
mack24's Avatar
mack24
Thread Starter
|
Registered User
Joined: Mar 2007
Posts: 7
Likes: 0
From:
Default Engine Light P0358

Hi, I have a 02 Durango. Just changed my spark plugs. Went for a test drive and noticed it wasn't running right, and the engine light would stay on. Opened the hood and noticed the #8 wire harness to coil was disconnected. Must have missed it when replacing the plugs. So I connected it back together. It seems to run just fine now. Although the engine light is still staying on. The code is P0358: Ignition coil H primary/secondary ciruit malfunction. I am guessing that must be the #8 coil I reconnected. And that possibly the engine light is staying on because it must be reset now. Is this correct? And if so how do I reset to turn off the engine light? Thankyou.
 
Reply
Old Mar 20, 2007 | 12:55 PM
  #2  
mack24's Avatar
mack24
Thread Starter
|
Registered User
Joined: Mar 2007
Posts: 7
Likes: 0
From:
Default RE: Engine Light P0358

Well today the problem has dissappeared, no more engine light. It seems to have fixed itself. After going through a search, my next step would have been to disconnect the neg. on the battery for 20 min. But it is not necessary now.
 
Reply
Old Mar 20, 2007 | 12:59 PM
  #3  
hydrashocker's Avatar
hydrashocker
Hall Of Fame
20 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Jun 2005
Posts: 14,228
Likes: 19
From: Riverton, UT
Default RE: Engine Light P0358

Nice to see that you got your problem fixed. Ya your light just needed to reset it's self.
 
Reply




All times are GMT -4. The time now is 06:57 AM.