1st Gen Intrepid 1993 through 1997 Intrepids

1997 interpid with codes

Thread Tools
 
Search this Thread
 
Old Aug 27, 2010 | 03:25 PM
  #1  
Stephen Bolger's Avatar
Stephen Bolger
Thread Starter
|
Registered User
Joined: Sep 2009
Posts: 12
Likes: 0
Default 1997 interpid with codes P0175,p0300,p0302,p0304,p0306,p0171

I have a 1997 interpid sport 3.5l With these codes P0175,p0300,p0302,p0304,p0306,p0171.

I have replaced spark plugs ,spark wires, O2 sensors, coil pack, fuel injectors, Battery.

could it be one of the following?
map sensor bad?
camshaft sensor Bad?
Crank Shaft Sensor bad?
Fuel pump?
Timing belt?
 

Last edited by Stephen Bolger; Sep 1, 2010 at 05:35 PM. Reason: Added more info
Reply
Old Sep 1, 2010 | 05:39 PM
  #2  
Stephen Bolger's Avatar
Stephen Bolger
Thread Starter
|
Registered User
Joined: Sep 2009
Posts: 12
Likes: 0
Default

Any help would be helpfull..... I am to the point of pulling the motor and rebuilding it.
 
Reply
Old Sep 1, 2010 | 08:06 PM
  #3  
sapporo's Avatar
sapporo
Banned
Joined: Jun 2010
Posts: 1,383
Likes: 0
Default

to me, codes really mean nothing without symptoms, data stream information from the scanner. you could have bogus codes from something getting unplugged while the key was on.

I never 'fix' a car based on just the code. that'll lead you down the wrong path and cost too much time and money. a code is just one small segment toward proper diagnosis.
 
Reply
Old Sep 2, 2010 | 06:04 PM
  #4  
Stephen Bolger's Avatar
Stephen Bolger
Thread Starter
|
Registered User
Joined: Sep 2009
Posts: 12
Likes: 0
Default

I think i found the problem. i have fuel running out the vacum line that goes to fuel pressure regulator. so i think the fuel pressure reg is bad.
 
Reply
Old Sep 2, 2010 | 06:25 PM
  #5  
sapporo's Avatar
sapporo
Banned
Joined: Jun 2010
Posts: 1,383
Likes: 0
Default

that's great and see how something really unrelated to all the sensors and computer caused erroneous codes.
 
Reply




All times are GMT -4. The time now is 04:00 AM.