Nice 97 ATX Neon, PA (PENDING)/ MTX SOLD!!
#1
Nice 97 ATX Neon, PA (PENDING)/ MTX SOLD!!
FOR SALE:
Car: 1997 Plymouth Neon SOHC ATX (PENDING)
Location: Mechanicsburg, Pa 17055
I have seen some neons for sale here when people weren’t being honest. Although this is my first time selling on here, I’m going to try my best to describe the car I’m selling, cause I want it to go to a good home. I’m going to have the pictures do most of the talking.
I’m selling my neon. It’s a black 4 door. Has 117,000 miles on the body & transmission and about 2,000 on the motor. This could be a great little car for someone. I tried to make this my project car. Im about to start a family and this car has to go. I really hope this goes to someone who’d appreciate, and take car of the car like I have. I performed the usual maintenance to this vehicle, and it consisted of:
New Head gasket
New Valve cover gasket
New oil pan gasket
New radiator
New battery
New timing belt and water pump
New spark plugs and wires
New Fuel filter regulator (you know the one that always gets clogged)
Head has been resurfaced w/ 95 cam (sounds a little more aggressive)
DOHC block ( higher compression, 10:3.1)
Oil changed (Valvoline Max Life)
Oil pan completely scrubbed down to get all the sludge off
Radiator flush
New o2 sensors (before and after cat)
Very nicely white painted dash and more (this is the way I bought it)
New wiper blades
Compression test done. Its all good.
I went to the car wash to give it a good spray (26 june) and when I went to go spray the roof, some paint peeled off!!! (about the size of a dollar)[:@]
It also has a sagging headliner which I temporarily fixed with pins, I DO HAVE TITLE IN HAND. There is no P/S or A/C, but heater blows hella hot!! The cars paint could use tlc.
PRICE IS BELOW
Comes with: Power bulge hood, bumper w/ foglight holes (needs a lil tlc), Iceman CAI, Pacesetter header, Prothane filled front mount, Comp 200 Cam w/ Magnum valve springs (not installed), Mopar high rate springs and KYB GR2 struts w/ brand new isolators, 01 R/T 16” rims and tires (tires need replaced) and rear strut bar.
I was going to swap to MTX so I bought a Hurst short throw shifter w/ booger bushings.
I will take more pics upon requests .
Thank you for viewing this. If there are any questions don’t hesitate to pm me, or my email is luis.martinez13@us.army.mil THANKS GUYS!!
If someone knows how to get these pics to show up lmk.
UPDATE!!!!: There seems to be alot of people interested in buying the cars.
4 = Black ATX (PENDING)
- Purple MTX ShellSOLD!!!
So what Im going to do is make this a FIRST COME FIRST SERVE.
I was going to have people bid on them, but that takes too long IMHO.
Prices are: Black ATX 1,200 (PENDING)
If there are any questions my email is uptop or you can pm me. Wont sell the vehicles until your 100% ready, that means you looked at it and or drove it. Thanks.
Car: 1997 Plymouth Neon SOHC ATX (PENDING)
Location: Mechanicsburg, Pa 17055
I have seen some neons for sale here when people weren’t being honest. Although this is my first time selling on here, I’m going to try my best to describe the car I’m selling, cause I want it to go to a good home. I’m going to have the pictures do most of the talking.
I’m selling my neon. It’s a black 4 door. Has 117,000 miles on the body & transmission and about 2,000 on the motor. This could be a great little car for someone. I tried to make this my project car. Im about to start a family and this car has to go. I really hope this goes to someone who’d appreciate, and take car of the car like I have. I performed the usual maintenance to this vehicle, and it consisted of:
New Head gasket
New Valve cover gasket
New oil pan gasket
New radiator
New battery
New timing belt and water pump
New spark plugs and wires
New Fuel filter regulator (you know the one that always gets clogged)
Head has been resurfaced w/ 95 cam (sounds a little more aggressive)
DOHC block ( higher compression, 10:3.1)
Oil changed (Valvoline Max Life)
Oil pan completely scrubbed down to get all the sludge off
Radiator flush
New o2 sensors (before and after cat)
Very nicely white painted dash and more (this is the way I bought it)
New wiper blades
Compression test done. Its all good.
I went to the car wash to give it a good spray (26 june) and when I went to go spray the roof, some paint peeled off!!! (about the size of a dollar)[:@]
It also has a sagging headliner which I temporarily fixed with pins, I DO HAVE TITLE IN HAND. There is no P/S or A/C, but heater blows hella hot!! The cars paint could use tlc.
PRICE IS BELOW
Comes with: Power bulge hood, bumper w/ foglight holes (needs a lil tlc), Iceman CAI, Pacesetter header, Prothane filled front mount, Comp 200 Cam w/ Magnum valve springs (not installed), Mopar high rate springs and KYB GR2 struts w/ brand new isolators, 01 R/T 16” rims and tires (tires need replaced) and rear strut bar.
I was going to swap to MTX so I bought a Hurst short throw shifter w/ booger bushings.
I will take more pics upon requests .
Thank you for viewing this. If there are any questions don’t hesitate to pm me, or my email is luis.martinez13@us.army.mil THANKS GUYS!!
If someone knows how to get these pics to show up lmk.
UPDATE!!!!: There seems to be alot of people interested in buying the cars.
4 = Black ATX (PENDING)
- Purple MTX ShellSOLD!!!
So what Im going to do is make this a FIRST COME FIRST SERVE.
I was going to have people bid on them, but that takes too long IMHO.
Prices are: Black ATX 1,200 (PENDING)
If there are any questions my email is uptop or you can pm me. Wont sell the vehicles until your 100% ready, that means you looked at it and or drove it. Thanks.
#4
#7
Trending Topics
#10
RE: 2 neons for price of 1, PA
ORIGINAL: turbodneonracer96
Well ill talk to my dad tomorrow. As for now i have dibs on the shell. Because i do want it. Do i get the clutch with it still or no!
Well ill talk to my dad tomorrow. As for now i have dibs on the shell. Because i do want it. Do i get the clutch with it still or no!