1st Gen Neon 1995 through 1999 Neons

Door panels

Old Jul 18, 2007 | 12:40 PM
  #1  
luckycharms's Avatar
luckycharms
Thread Starter
|
Rookie
Joined: Jul 2007
Posts: 54
Likes: 0
Default Door panels

i was hoping to take off both front and back door panels on my 96 neon to put a different fabric on, but i have no idea how to go about this,someone said theres clips i can break so i shouldnt try it but someone else said its not that hard anyone know how?
 
Reply
Old Jul 18, 2007 | 01:52 PM
  #2  
das2123's Avatar
das2123
Legend
Joined: Apr 2006
Posts: 9,112
Likes: 1
From: Spring, TX
Default RE: Door panels

If you have manual windows you need to remove the window crank and then I think there is 1 or 2 bolts right behind the door handle that need to come out. After that, just pull the panel off slowly and carefully.
 
Reply
Old Jul 18, 2007 | 03:30 PM
  #3  
boxerjl2's Avatar
boxerjl2
Record Breaker
Joined: Apr 2007
Posts: 1,619
Likes: 0
From: Sand Springs Oklahoma
Default RE: Door panels

my door panels must be differant then everone elses cuz everone talks about putting material on there door panels but on my door panels i dont see it to be possible except on a removable piece of material styrofoam

but you dont even have to take of the door panel for those so im confused
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 03:23 PM.