eBay is the best place for cheap stuff. Thats where Spud got his intercooler piping I believe.

 

i'll just try to make my own. f ebay....i don't like cheap....price dosn't matter so i will just do the pipesmyself onece i get the turbo on there

 

i bought my srt intercooler from srtforums.com for about $60 shipped
the pipes were from ebay and worked out great....for about $90 shipped i almost had enough pipe left over for 1 more turbo kit

 

I was under the impression the SRT-4 intercoolers would get heatsoaked before you were out of 3rd gear? My buddie's 04 SRT would do that a good bit, and the one end tank is a very poor design for flow. You could still get a really good universal on ebay for $70-$100 shipped. I got my 27"x9"x3" core with 2.5" in/out for $70 shipped! Rated to 500 horsies.

Not trying to say it's the worst intercooler, but IMHO there's so many better out there, otherwise the SRT guys wouldn't be getting rid of them so fast.

 

good info

http://www.are.com.au/techtalk/intec...%20Maintenance

 

i knew most of that but thanks for the link i did learn a little....so what ic do you guys recomend?...and please don't say off of ebay[>:]think about it $70 for a ic is to cheap...you get what you pay for.

 

i would just go with the srt 4 intercooler. it souldent have problems with heat soak as long as your not running really high amouts of boost and its mounted in a position where it gets some air.

http://www.homemadeturbo.com/forum/i...;threadid=3363

 

I think they get rid of them because they need bigger ones after they upgrade the turbo's as well. They get rid of the turbo's as well...doesn't mean they are good quality.

 

most srt guys replace the stock itecooler for a big front mount.....and as said, bigger turbo = moe boost which means there is alot more air that needs to get cooled....

the cheap ebay intercoolers are junk....the core design for air flow is very poor.....works more like a regular radiator then an intercooler should

 

i agree the ebay ones are ****....so will the srt-4 ic be good for about8psi?....whats the limit on a srt-4 ic?