1st Gen Neon 1995 through 1999 Neons

Look at this ...2.4 swap

Thread Tools
 
Search this Thread
 
Old Feb 15, 2008 | 02:32 PM
  #1  
boxerjl2's Avatar
boxerjl2
Thread Starter
|
Record Breaker
Joined: Apr 2007
Posts: 1,619
Likes: 0
From: Sand Springs Oklahoma
Default Look at this ...2.4 swap

i was looking for somewere to Buy some DOHC heater hard lines and this popped up

http://www.turbododge.com/forums/f11...1-daytona.html

i know its not much about the neon but most people swap the 2.4 in

here is what is left on my list, till i can do the swap into my Neon

2.4L Stratus motor $819
Timing Belt Kit $186
Head Gasket $60
Head Bolts $30
DOHC Thermostat $10
Mini Breather Filter $11
Modern Brakes $55
Modern Rotors $90
DOHC heater hard lines
 
Reply
Old Feb 15, 2008 | 02:35 PM
  #2  
boxerjl2's Avatar
boxerjl2
Thread Starter
|
Record Breaker
Joined: Apr 2007
Posts: 1,619
Likes: 0
From: Sand Springs Oklahoma
Default RE: Look at this ...

were the heck has Aerorat been havent seen him on in a while i just want to know what timing belt kit that he used
 
Reply
Old Feb 15, 2008 | 03:57 PM
  #3  
95to96transplantneon's Avatar
95to96transplantneon
Record Breaker
Joined: Apr 2007
Posts: 1,885
Likes: 0
From:
Default RE: Look at this ...

areo's srt motor will use a slightly different belt then yours they have different tentioners...
 
Reply
Old Feb 15, 2008 | 04:09 PM
  #4  
95to96transplantneon's Avatar
95to96transplantneon
Record Breaker
Joined: Apr 2007
Posts: 1,885
Likes: 0
From:
Default RE: Look at this ...

heres a 2.4 in a dodge omni... plus its megasquirted...
 
Reply
Old Feb 15, 2008 | 04:36 PM
  #5  
95to96transplantneon's Avatar
95to96transplantneon
Record Breaker
Joined: Apr 2007
Posts: 1,885
Likes: 0
From:
Default RE: Look at this ...

here josh here is the head gasket and all the other gaskets we are going to need...

http://cgi.ebay.com/ebaymotors/95-99...5571QQtcZphoto
 
Reply
Old Feb 15, 2008 | 09:18 PM
  #6  
Aerorat's Avatar
Aerorat
All Star
Joined: May 2006
Posts: 789
Likes: 0
From: Statesville, NC
Default RE: Look at this ...

I am still around a little bit I am back at work and we are in the middle of moving to a new plant so I am working 16-20 hours
 
Reply
Old Feb 16, 2008 | 05:20 AM
  #7  
boxerjl2's Avatar
boxerjl2
Thread Starter
|
Record Breaker
Joined: Apr 2007
Posts: 1,619
Likes: 0
From: Sand Springs Oklahoma
Default RE: Look at this ...

it would of been nice to see that before buying my other gaskets its ok though that was only like $12 or so
 
Reply
Old Feb 16, 2008 | 05:23 AM
  #8  
boxerjl2's Avatar
boxerjl2
Thread Starter
|
Record Breaker
Joined: Apr 2007
Posts: 1,619
Likes: 0
From: Sand Springs Oklahoma
Default RE: Look at this ...

Jeremy did you hear anything from russ yet about the timing belt kit?
 
Reply




All times are GMT -4. The time now is 07:42 PM.