2.4 swap
Thread Starter
Joined: Feb 2008
Posts: 14
Likes: 0
2.4 swap
hey guys. I saw a 2.4 dodge motor in a dodge caravan today at the junkyard. Im not exactly sure of the year but it was about a 95. What all would i have to do to get it to bolt up into my neon that right now has a 2.0 sohc and a 5 speed transmission?
Record Breaker
Joined: Apr 2007
Posts: 1,885
Likes: 0
From:
RE: 2.4 swap
minimally...
1) 2.4L DOHC engine from 95-02 Chrysler Products
2) 2.0L DOHC Intake manifold AMM intake manifold...
3) 2.0L DOHC exhaust manifold (stock or aftermarket)
4) 2.0L DOHC Coolent hard pipes
5) 2.0L DOHC PCM (Stock, Mopar, or AFX)
6) 2.0L DOHC Wiring harness
7) 2.0L Crankshaft pulley (Some 2.4's will require the use of a 2.0L UDP)
8) 2.4L Motor mount adapter 70
9) PT Cruiser water pump output neck 4884291AA, O-Ring 6503180 2.63
10) 2nd Gen Neon fuel pressure regulator (58psi) OR 24lb. injectors (one or the other)
11) PT Cruiser alternator brackets
12) DOHC Hood
13) 2.4L Stratus motor mount
1) 2.4L DOHC engine from 95-02 Chrysler Products
2) 2.0L DOHC Intake manifold AMM intake manifold...
3) 2.0L DOHC exhaust manifold (stock or aftermarket)
4) 2.0L DOHC Coolent hard pipes
5) 2.0L DOHC PCM (Stock, Mopar, or AFX)
6) 2.0L DOHC Wiring harness
7) 2.0L Crankshaft pulley (Some 2.4's will require the use of a 2.0L UDP)
8) 2.4L Motor mount adapter 70
9) PT Cruiser water pump output neck 4884291AA, O-Ring 6503180 2.63
10) 2nd Gen Neon fuel pressure regulator (58psi) OR 24lb. injectors (one or the other)
11) PT Cruiser alternator brackets
12) DOHC Hood
13) 2.4L Stratus motor mount