1st Gen Neon 1995 through 1999 Neons

Mitsi/Neon

Thread Tools
 
Search this Thread
 
Old Jun 4, 2008 | 08:42 AM
  #1  
moparmandjh's Avatar
moparmandjh
Thread Starter
|
Amateur
Joined: May 2008
Posts: 41
Likes: 0
From: SW Missouri
Default Mitsi/Neon

My son is thinking about buying a 97 Eclipse 2.0 dohc, is the drive train interchangeable with first gen Neons?
Dave
 
Reply
Old Jun 4, 2008 | 09:10 AM
  #2  
das2123's Avatar
das2123
Legend
Joined: Apr 2006
Posts: 9,112
Likes: 1
From: Spring, TX
Default RE: Mitsi/Neon

Block is the same....thats all.
 
Reply
Old Jun 6, 2008 | 09:41 AM
  #3  
Ghost Neon 2's Avatar
Ghost Neon 2
Record Breaker
Joined: Dec 2006
Posts: 1,216
Likes: 0
From: Baltimore, Maryland
Default RE: Mitsi/Neon

What are you referring to when you say "driver train?" The transmission, lash adjusters, lifters, etc?
 
Reply
Old Jun 6, 2008 | 10:44 AM
  #4  
moparmandjh's Avatar
moparmandjh
Thread Starter
|
Amateur
Joined: May 2008
Posts: 41
Likes: 0
From: SW Missouri
Default RE: Mitsi/Neon

Just wondering about engine, trans, etc.
Dave
 
Reply
Old Jun 6, 2008 | 11:36 AM
  #5  
I_Ride_Neon's Avatar
I_Ride_Neon
Record Breaker
Joined: Nov 2007
Posts: 2,004
Likes: 0
From: Dubuque, Iowa
Default RE: Mitsi/Neon

You can use the lower end of the engine. The head is backwards and will not work on the neon. The tranny is way to big to fit into a neon and will not work without modification. So you can only use the block, brank, pistons. You will even need to use the sensors off you eclipse. and brackets.
 
Reply
Old Jun 7, 2008 | 02:36 PM
  #6  
das2123's Avatar
das2123
Legend
Joined: Apr 2006
Posts: 9,112
Likes: 1
From: Spring, TX
Default RE: Mitsi/Neon

ORIGINAL: I_Ride_Neon
brank
Is that what makes the Eclipse so fast
 
Reply




All times are GMT -4. The time now is 03:47 PM.