Lots of projects (pics uploaded now)
#1
06-17-2008, 08:36 PM
Join Date: Feb 2008
Location:
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Lots of projects (pics uploaded now)
Pics are up but you have to click the attachments, couldnt get them to show up, odd little note, photobucket seems to be down
Lots of projects lately, including................
97 SOHC Highline Sedan DD
ATX to MTX in my 97 Neon Highline
Open exhuast exiting the drivers side, Unorthodox Racing UDP,decent stereo, is my DD
Getting a MTX out of a 95 base model, Mopar PCM, Fidanza aluminum flywheel, fidanza clutch, quaife, new motor mounts with race front and street side inserts, vitors poly bushing bobble, 3.0 CAI, Maddog STS and spherical rod ends on all 4 cable ends for the shifter
all getting put on in the next 2 weeks (short on time since im also moving in 2 weeks)
96 SOHC Base SCCA EM Race Car
DOHC head checked out ok, intake manifold ok, need to find a SRT turbofold so I can send them all off to get ported and matched, and then sent out to get ceramic coated by Swain Tech
in the meantime, i installed the Maddog STS for this car, with spherical rod ends on all 4 cable ends, pics following
currently have my 97-99 Mopar PCM for the above project in my 96, I know it wont control the fans, but with the other computer, even with 105 degree abient temps, the car wouldnt heat up enough to turn the fans on in a traffic jam, it stays at 180 degrees ( i dont have the a/c or power steering to absorb heat, and i have the visteon radiator that MPx blew out a month or so ago, plus a 180 thermostat)
pictures a little later since photobucket isnt working for me, if anyone here wants to explain how to actually put the pics in the post instead of links that would help
[IMG]local://upfiles/84389/3DA21CB8276E4D06AE2270BBEE095E4E.jpg[/IMG]
Lots of projects lately, including................
97 SOHC Highline Sedan DD
ATX to MTX in my 97 Neon Highline
Open exhuast exiting the drivers side, Unorthodox Racing UDP,decent stereo, is my DD
Getting a MTX out of a 95 base model, Mopar PCM, Fidanza aluminum flywheel, fidanza clutch, quaife, new motor mounts with race front and street side inserts, vitors poly bushing bobble, 3.0 CAI, Maddog STS and spherical rod ends on all 4 cable ends for the shifter
all getting put on in the next 2 weeks (short on time since im also moving in 2 weeks)
96 SOHC Base SCCA EM Race Car
DOHC head checked out ok, intake manifold ok, need to find a SRT turbofold so I can send them all off to get ported and matched, and then sent out to get ceramic coated by Swain Tech
in the meantime, i installed the Maddog STS for this car, with spherical rod ends on all 4 cable ends, pics following
currently have my 97-99 Mopar PCM for the above project in my 96, I know it wont control the fans, but with the other computer, even with 105 degree abient temps, the car wouldnt heat up enough to turn the fans on in a traffic jam, it stays at 180 degrees ( i dont have the a/c or power steering to absorb heat, and i have the visteon radiator that MPx blew out a month or so ago, plus a 180 thermostat)
pictures a little later since photobucket isnt working for me, if anyone here wants to explain how to actually put the pics in the post instead of links that would help
[IMG]local://upfiles/84389/3DA21CB8276E4D06AE2270BBEE095E4E.jpg[/IMG]
#3
06-18-2008, 04:10 PM
Join Date: Feb 2008
Location:
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
#4
06-18-2008, 04:10 PM
Join Date: Feb 2008
Location:
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts