1st Gen Neon 1995 through 1999 Neons

mopar pcm Question.....

Thread Tools
 
Search this Thread
 
Old Feb 5, 2009 | 08:05 PM
  #1  
Vjjohn79's Avatar
Vjjohn79
Thread Starter
|
Registered User
Joined: Feb 2009
Posts: 6
Likes: 0
From: G- town NY
Thumbs up mopar pcm Question.....

I own a 96 base sohc mtx. i have a mopar pcm installed, my car wont pass inspection. the inspector says its the down stream o2 sensor. my question is if I replace the o2 sensor will it pass inspection? i know the pcm wont show a check engine light and you can use the egr block off plate and it isnt supposed to show a chkengine light for that. so does a mopar pcm also bypass the o2 sensors (so that the air/fuel ratio isnt affected by them)? and if so then how can i get my car to pass inspection? if possible... thanks
 
Reply
Old Feb 5, 2009 | 09:09 PM
  #2  
streetracer88's Avatar
streetracer88
All Star
Joined: Jul 2008
Posts: 816
Likes: 0
From: Cullman,Al
Default

the egr block of plate set off my CEL and just replace the downstream o2 sensor as if you need one cheaper i have a downstream o2 sensor brand new never used let me know if you need it
 
Reply
Old Feb 5, 2009 | 09:41 PM
  #3  
spudsterier's Avatar
spudsterier
Legend
Joined: Feb 2006
Posts: 9,284
Likes: 1
From: mendota, illinois
Default

Originally Posted by Vjjohn79
I own a 96 base sohc mtx. i have a mopar pcm installed, my car wont pass inspection. the inspector says its the down stream o2 sensor. my question is if I replace the o2 sensor will it pass inspection? i know the pcm wont show a check engine light and you can use the egr block off plate and it isnt supposed to show a chkengine light for that. so does a mopar pcm also bypass the o2 sensors (so that the air/fuel ratio isnt affected by them)? and if so then how can i get my car to pass inspection? if possible... thanks
the mopar pcm still uses both o2 sensors....once the sensor is replaced, the light should go away...as long as thats the only issue....
the mopar pcm does not bypass the egr valve
 
Reply
Old Feb 5, 2009 | 10:14 PM
  #4  
sabin420's Avatar
sabin420
Captain
Joined: Feb 2008
Posts: 697
Likes: 0
From: Atlanta, GA
Default

Originally Posted by Vjjohn79
I own a 96 base sohc mtx. i have a mopar pcm installed, my car wont pass inspection. the inspector says its the down stream o2 sensor. my question is if I replace the o2 sensor will it pass inspection?
most likely...It can also mean your Catalytic converter is going bad...but I'd try the O2 Sensor first...Cheapest and Most likely your problem.

Originally Posted by Vjj
i know the pcm wont show a check engine light and you can use the egr block off plate and it isnt supposed to show a chkengine light for that. so does a mopar pcm also bypass the o2 sensors (so that the air/fuel ratio isnt affected by them)?
The O2 sensor is the most vital part of the computer's decision on air/fuel ratio...it detects the amount of oxygen in the exhaust gas by varying a small DC voltage that the sensor changes. 0-5 volts or something like that. It constantly varies a richer and leaner mixture back and fourth between cylinders, adjusting to try to keep the Ideal air/fuel mixture of 14:1.
 
Reply
Old Feb 5, 2009 | 10:15 PM
  #5  
sabin420's Avatar
sabin420
Captain
Joined: Feb 2008
Posts: 697
Likes: 0
From: Atlanta, GA
Default

I have also heard that you are supposed to take it to the dealership to have your vin and mileage programmed into the ECU for it to pass emissions.
 
Reply
Old Feb 5, 2009 | 10:16 PM
  #6  
sabin420's Avatar
sabin420
Captain
Joined: Feb 2008
Posts: 697
Likes: 0
From: Atlanta, GA
Default

< Have one, just don't have to get emissions where I live.
 
Reply
Old Feb 5, 2009 | 11:34 PM
  #7  
das2123's Avatar
das2123
Legend
Joined: Apr 2006
Posts: 9,112
Likes: 1
From: Spring, TX
Default

Originally Posted by sabin420
I have also heard that you are supposed to take it to the dealership to have your vin and mileage programmed into the ECU for it to pass emissions.
The PCM does not store this data. I have heard people say this, but I have yet to see proof.

My Mopar PCM was never flashed and always passed emissions here in Houston, TX.
 
Reply
Old Feb 6, 2009 | 10:15 AM
  #8  
spudsterier's Avatar
spudsterier
Legend
Joined: Feb 2006
Posts: 9,284
Likes: 1
From: mendota, illinois
Default

Originally Posted by sabin420
< Have one, just don't have to get emissions where I live.
Originally Posted by sabin420
I have also heard that you are supposed to take it to the dealership to have your vin and mileage programmed into the ECU for it to pass emissions.
you know....
all this info can easily just be put into 1 post instead of always doing multiple posts in a row
 
Reply
Old Feb 6, 2009 | 01:39 PM
  #9  
Vjjohn79's Avatar
Vjjohn79
Thread Starter
|
Registered User
Joined: Feb 2009
Posts: 6
Likes: 0
From: G- town NY
Default

Thanks for all the help. IF any body has any other info about the mopar pcm unit and what i controls and doesnt please let me know, so i can know, and knowing is half the battle.
 
Reply
Old Feb 6, 2009 | 06:13 PM
  #10  
DOHCgarrett t3's Avatar
DOHCgarrett t3
Record Breaker
15 Year Member
Joined: Nov 2006
Posts: 1,791
Likes: 0
From: Detroit Michigan
Default

easy on the new guy spud. He is proably high.
 
Reply



All times are GMT -4. The time now is 05:31 AM.