1st Gen Neon 1995 through 1999 Neons

has anybody ever

Thread Tools
 
Search this Thread
 
Old Feb 17, 2009 | 03:37 PM
  #1  
scraper neon's Avatar
scraper neon
Thread Starter
|
Rookie
Joined: Feb 2009
Posts: 55
Likes: 0
From: citrus heights
Default has anybody ever

sucked up water through there intake besides me?
 
Reply
Old Feb 17, 2009 | 04:06 PM
  #2  
streetracer88's Avatar
streetracer88
All Star
Joined: Jul 2008
Posts: 816
Likes: 0
From: Cullman,Al
Default

i have with my car and never bent any rods it is possible you did but you might be lucky like i got with my car and not bend any
 
Reply
Old Feb 17, 2009 | 04:49 PM
  #3  
spudsterier's Avatar
spudsterier
Legend
Joined: Feb 2006
Posts: 9,284
Likes: 1
From: mendota, illinois
Default

this can be answered in your other post without making a new post about the same thing.....
 
Reply
Old Feb 17, 2009 | 06:01 PM
  #4  
I_Ride_Neon's Avatar
I_Ride_Neon
Record Breaker
Joined: Nov 2007
Posts: 2,004
Likes: 0
From: Dubuque, Iowa
Default

Yes. I have sucked snow in my motor. It died, next morning it started with starter fluid. I got an oil change and it was fine. It sounds like you got alot of water in your motor and its in your bearings. The best thing you can do is run the light oil in the car and change it again. Maybe you will be lucky.

Now I recall sucks water in my motor. It spuddered and wouldnt really drive. I dried off my air filter using a air gun. It ran fine afterwards.
 
Reply
Old Feb 17, 2009 | 09:40 PM
  #5  
sabin420's Avatar
sabin420
Captain
Joined: Feb 2008
Posts: 697
Likes: 0
From: Atlanta, GA
Default

they also make a water remover you need to put in with the thin oil. You can get lucky and get it all out without serious damage.
 
Reply
Old Feb 18, 2009 | 05:40 AM
  #6  
scraper neon's Avatar
scraper neon
Thread Starter
|
Rookie
Joined: Feb 2009
Posts: 55
Likes: 0
From: citrus heights
Default

and that can make all that noise? cause its pretty loud and when i think bout it i just redid the top end so the bottom end has who knows how many miles, so wouldnt the connecting rods go first?
 
Reply




All times are GMT -4. The time now is 08:33 PM.