No 4th Gear
#1
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Ive got a 98 Dodge Neon SOHC, Automatic. i've got an engine light, code P0743 Torque Converter Clutch Circuit Electrical. is this the sensor located behind the trans dipstick tube or or the one all the way to the driver side of the trans. i've got no 4th gear, and the car pops out of drive when you floor it and goes into neutral. it doesn't slip, the shifter it self actually moves. I adjusted the kickdown and it does the same thing. fluid and filter are new. any ideas? thanks
#2
#3
#5
#6
#7
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Yea, it has a cable that runs to the throttle body. Have someone put the car in 1st gear, and push the pedal up and down, then put in back in park. While you stand under the hood watch the operation of the arm, you should notice the stick. I use some wd-40 in the process. It will either break loose, or break. I think it has 2 arms there that should move separately from each other. Its been a year since I messed with an auto, so my descriptions may be way off.
Trending Topics
#9
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
not to make any of you wrong but i had the same problem and my mechanic said that it was in the trans and it would cost $600 to fix plus another $400 for stupid stuff that i couldnt do so i got rid of my car after dumping lots of money into it because i really needed another car at the time so your best bet is if you got another good tranny pull the one in your car out and put that one in but thats my 2 cents i could be wrong but thats what i was told and my car shifted smooth just kept the CEL on