1st Gen Neon 1995 through 1999 Neons

E-Brake problem

Thread Tools
 
Search this Thread
 
Old Jul 13, 2009 | 02:24 AM
  #1  
antichrysler's Avatar
antichrysler
Thread Starter
|
Registered User
Joined: May 2009
Posts: 12
Likes: 0
Default E-Brake problem

Well, I'm new to the world of Neons. My girlfriend just picked up a 98 neon, it's a 5spd 4 door. When you park it you pull up the e-brake and it goes all the way up but the car still moves backwards on a hill. It just seems like it doesn't fully engage. Any thoughts on this? I'm thinking it just needs to be tightened. How would I go about doing this?
 
Reply
Old Jul 13, 2009 | 11:44 AM
  #2  
ldiablo233's Avatar
ldiablo233
Professional
Joined: Aug 2007
Posts: 235
Likes: 0
Default

Does it require any pressure when pulling up or hold the car back at all? If not thenthe cables probably broke, but otherwise in the back of each drum theres a little slot(usually covered by a little piece of rubber) that you stick a screwdriver in and turn the little gear to tighten/loosen. Forgot which direction is which but you'll figure it out.
 
Reply
Old Jul 14, 2009 | 08:21 AM
  #3  
antichrysler's Avatar
antichrysler
Thread Starter
|
Registered User
Joined: May 2009
Posts: 12
Likes: 0
Default

There's a bit of pressure there. I don't think the cable is broken, just needs to be tightened. There's nothing in the center console at all? When you're talking about this adjustment on the drum do I need to take the wheel off to get to it?
 
Reply
Old Jul 15, 2009 | 10:20 PM
  #4  
ldiablo233's Avatar
ldiablo233
Professional
Joined: Aug 2007
Posts: 235
Likes: 0
Default

No adjustment on the console, the pads are being adjusted not the actual cable. Just jack the car up a bit and get behind the wheel and you should see it.
 
Reply
Old Jul 15, 2009 | 11:50 PM
  #5  
dipsherry's Avatar
dipsherry
Record Breaker
Joined: Feb 2007
Posts: 1,091
Likes: 1
From: daytona beach florida
Default

yeah you wont need to take off the wheel just get under the car and you will see where to put the screwdriver and tighten i do believe it is up dont recall pressing the gear down
 

Last edited by dipsherry; Jul 16, 2009 at 11:27 PM. Reason: forgot laying sideways makes sense of direction wrong
Reply
Old Jul 16, 2009 | 08:58 AM
  #6  
antichrysler's Avatar
antichrysler
Thread Starter
|
Registered User
Joined: May 2009
Posts: 12
Likes: 0
Default

Alright. I'll try it out tomorrow night when I see her. Thanks for the help!
 
Reply
Old Jul 16, 2009 | 10:54 AM
  #7  
ldiablo233's Avatar
ldiablo233
Professional
Joined: Aug 2007
Posts: 235
Likes: 0
Default

Tip: the gear moves up and down not left and right, maybe ^^ was laying sideways lol.
 
Reply
Old Jul 16, 2009 | 11:25 PM
  #8  
dipsherry's Avatar
dipsherry
Record Breaker
Joined: Feb 2007
Posts: 1,091
Likes: 1
From: daytona beach florida
Default

yeah thanks i feel like a tard lol it moves up guess i just forgot about layin on the ground
 
Reply
Old Jul 17, 2009 | 12:33 AM
  #9  
ldiablo233's Avatar
ldiablo233
Professional
Joined: Aug 2007
Posts: 235
Likes: 0
Default

Originally Posted by dipsherry
yeah thanks i feel like a tard lol it moves up guess i just forgot about layin on the ground
well if you lay sideways its left and right lol
 
Reply




All times are GMT -4. The time now is 11:35 AM.