Lights and Intake for 96 DOHC Sport 4Dr
#1
Lights and Intake for 96 DOHC Sport 4Dr
Hey guys,
Just got my neon a few days ago, I'm looking to put an intake along with new head, tail, and fog lights on it to start off. Its a 1996 4Dr Neon Sport with the 16v DOHC engine. It has 81k miles, and my mechanic has found no issues with it. The breaks, their lines, and the rotors, and fluids have all been re-done since it was sitting for awhile. From what I was told the head gasket is okay but I do want to double check. She's been cleaned inside and out.
I was looking on ebay and I am considering this intake: http://www.ebay.com/itm/370586035919
With these heads and tails: http://www.ebay.com/itm/280806383774
With these fogs: http://www.ebay.com/itm/400235225096
I'm not sure what else I want to do to it in the future, but I probably won't be doing any swapping or anything serious. A supercharger or turbo would be the most I'd wind up doing to it, and that's a bit further down the road.
Any advice on which intake or lights to go with instead of the ones I've chosen would be appreciated, as well as any general advice.
Just got my neon a few days ago, I'm looking to put an intake along with new head, tail, and fog lights on it to start off. Its a 1996 4Dr Neon Sport with the 16v DOHC engine. It has 81k miles, and my mechanic has found no issues with it. The breaks, their lines, and the rotors, and fluids have all been re-done since it was sitting for awhile. From what I was told the head gasket is okay but I do want to double check. She's been cleaned inside and out.
I was looking on ebay and I am considering this intake: http://www.ebay.com/itm/370586035919
With these heads and tails: http://www.ebay.com/itm/280806383774
With these fogs: http://www.ebay.com/itm/400235225096
I'm not sure what else I want to do to it in the future, but I probably won't be doing any swapping or anything serious. A supercharger or turbo would be the most I'd wind up doing to it, and that's a bit further down the road.
Any advice on which intake or lights to go with instead of the ones I've chosen would be appreciated, as well as any general advice.
#2
Check www.modernperformance.com for parts. They cater to the neon's needs. They sell DEPO lights as opposed to some knockoff you would get from ebay.com. I have bought parts from ebay for cheap but have run into fitment issues. The intake you posted is a warm air intake and you may see a slight performance increase but it would be small.
I would start reading up on the forum...
https://dodgeforum.com/forum/1st-gen...-gen-faqs.html
https://dodgeforum.com/forum/1st-gen...d-how-tos.html
I would start reading up on the forum...
https://dodgeforum.com/forum/1st-gen...-gen-faqs.html
https://dodgeforum.com/forum/1st-gen...d-how-tos.html
#3
Thanks for the info and topics dude.
I'm aware of modern, and I've looked there. I really really don't like how the DEPOs look. The lights they offer for the second gen are about the same as the ones I found on ebay. Through pictures I've been able to verify that the ebay headlights are by Spyder, and are widely sold and are DOT approved. I really dislike the cosmetics of the DEPOs because I'm looking for blacked out light interiors with halo projectors. Do you know of anything like I'm looking for that you'd recommend? I'd retrofit them but the stock housings I have are in rough shape, and if I'm going to get new housings, I might as well get all new pre-done ones.
I've been looking at intakes, I've found this one, also by Spyder: http://www.ebay.com/itm/Dodge-Neon-9...-/320875033003 And I believe it locates the intake in front of the engine instead of behind judging on how it mounts. Is this any better? I'd really like an ICEMAN but they're not sold anymore and I wouldn't know where to find one. :c
I'm aware of modern, and I've looked there. I really really don't like how the DEPOs look. The lights they offer for the second gen are about the same as the ones I found on ebay. Through pictures I've been able to verify that the ebay headlights are by Spyder, and are widely sold and are DOT approved. I really dislike the cosmetics of the DEPOs because I'm looking for blacked out light interiors with halo projectors. Do you know of anything like I'm looking for that you'd recommend? I'd retrofit them but the stock housings I have are in rough shape, and if I'm going to get new housings, I might as well get all new pre-done ones.
I've been looking at intakes, I've found this one, also by Spyder: http://www.ebay.com/itm/Dodge-Neon-9...-/320875033003 And I believe it locates the intake in front of the engine instead of behind judging on how it mounts. Is this any better? I'd really like an ICEMAN but they're not sold anymore and I wouldn't know where to find one. :c
Last edited by ExcaliburMM; 04-13-2012 at 03:51 PM.
#4
#6
#7