1st Gen Neon 1995 through 1999 Neons

darrie

Thread Tools
 
Search this Thread
 
Old Apr 19, 2012 | 07:31 PM
  #1  
Darline Kandalec's Avatar
Darline Kandalec
Thread Starter
|
Registered User
Joined: Apr 2012
Posts: 4
Likes: 0
Default darrie

I own a 1999 Dodge Neon, bought when new,love my car.Both oxygen sensors on the heat side are not registering any voltage when testing the green and orange wires. Getting "service engine soon" light.Car is stalling out.Codes read those of both the oxygen sensors. What could be the problem?

OK, Different problem: The O2 sensors are not the problem; two different Auto Zones told me the wrong thing. After some work was done on the sensors, the light was still on the problems existed. A third Auto Zone told me it was not actually the sensors, but rather the O2 sensor CIRCUIT that's showing no activity. So, can anybody direct me to a wiring diagram or else tell me what number on the PCM does the O2 sensors (plural, both of them) connect to?
 

Last edited by Darline Kandalec; Apr 28, 2012 at 12:37 PM. Reason: original question turned out to not be the problem
Reply
Old Apr 21, 2012 | 12:03 AM
  #2  
master tech's Avatar
master tech
Site Moderator & Tech
15 Year Member
Joined: Apr 2007
Posts: 11,642
Likes: 108
From: Near Sacramento,ca
Default

Welcome to DF
If you should have voltage at those wires, then you may have an open circuit.
 
Reply




All times are GMT -4. The time now is 09:10 PM.