1st Gen Neon 1995 through 1999 Neons

Ignition Coil Connector

Old Jun 7, 2012 | 10:05 AM
  #1  
Travis Littlefield's Avatar
Travis Littlefield
Thread Starter
|
Registered User
Joined: Apr 2012
Posts: 1
Likes: 0
Default Ignition Coil Connector

I have a 95 dodge neon, everything runs good after all the upgrades ive done. i recently bought a NEWER coil pack off a 2002 neon and the connector. i want to place it on my 95, but the newer coil pack is a round pin connector. and on my connector the wires are blue, green, black, and on the new connector the wire order is black, green, blue. i was wondering if i could just splice the new connector on and replace the coil pack that way. the 2002 neon coil pack is a better one by far id really like to use it.
 
Reply
Old Jun 15, 2012 | 01:47 PM
  #2  
das2123's Avatar
das2123
Legend
Joined: Apr 2006
Posts: 9,112
Likes: 1
From: Spring, TX
Default

The 95-96.5 coil packs had the round pins and the 96.5-2005 had the flat pins. You can splice away and be good. Make sure the connections are good. Solder and shrink wrap them.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 03:36 PM.