1st Gen Neon 1995 through 1999 Neons

need wire help - installing starter/alarm

Old Dec 11, 2005 | 05:23 PM
  #1  
ace_master's Avatar
ace_master
Thread Starter
Joined: Dec 2005
Posts: 3
Likes: 0
Default need wire help - installing starter/alarm

Im installing a remote starter/alarm (x-shield xs-800s) in my 1997 dodgge neon and am having trouble with locating some of the wires...

Here is a ling to the wiring diagram for the alarm i am installing
remote starter and alarm diagram


I need the location of the following
-Air conditioner(+)
-High Voltage ON
-Battery charging indicator wire/engine oil pressure indicator wire

And i know where the ignition wires are located, but dont know which wires are which colors for the following
-Starter
-On
-Accessory

-If you look on the bottom of the picture in the link above, you will see there is 4 wires going to the ignition, but only 3 labels, does anyone know what the 4th wire is?
 
Reply
Old Dec 13, 2005 | 08:30 PM
  #2  
95SPRTcpe's Avatar
95SPRTcpe
Rookie
Joined: Oct 2005
Posts: 53
Likes: 0
From:
Default RE: need wire help - installing starter/alarm

i'm not sure of the wire but incase you haven't already, i'd suggest getting a repair manual with the wiring diargam in it. it'd probley be some help because the list the color of the wire for what it is.
 
Reply
Old Dec 14, 2005 | 07:32 AM
  #3  
RadarLove's Avatar
RadarLove
Record Breaker
Joined: Mar 2005
Posts: 1,205
Likes: 0
From:
Default RE: need wire help - installing starter/alarm

There are actually 4 wires coming from the ignition switch that you'll tap into. Been a while since I installed my setup though. I'd have to dig out the FSM (or just take a good look in there...) for that. PM me on this, so I'm not as likely to forget to look it up for you...
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 08:24 PM.