Is there an easy hook up point for an oil pressure and a water temp gauge?
electric or mechanical, where is the tap points, or wires to get the info to the gauges?

 

im not sure where they would be, but its a good thing you asked because im getting gauges today and was gonna ask the same thing

 

You should have two ports on the back of the block. See pics below, first two are for the oil...rest are for water!




[IMG]local://upfiles/33897/20A14448C65A448D84C9D7593D623DD0.jpg[/IMG]

[IMG]local://upfiles/33897/1C39212796E045B2BED9CE7CDCB31CAC.gif[/IMG]

[IMG]local://upfiles/33897/27AC486A67714C1AB80DBB5AFB10D407.jpg[/IMG]

[IMG]local://upfiles/33897/9C8DB267663A421DB38B8191DA74F842.jpg[/IMG]

[IMG]local://upfiles/33897/943111451A70497586D17CE5057A6BAD.jpg[/IMG]

 

What would I need to run electric gauges?

 

No.

 

no? I cant use electric gauges? []

 

I thought you asked if you needed to run electric gauges, not if you could. Yes, you can, no, you don't need to. I have no experience with electrical gauges. I'm sure they come with installation instructions.