headliner... rear deck question
#1
headliner... rear deck question
well my dad kinda punched the roof/side panels on my Neon and now i have 2 fist marks on my roof... and i would like to pop them out but how can i take out the head liner without ruining it? i know i have to take out the sun visors and the rear pin thing in the middle. is there anything else? and also after i switched out my rear speakers and went to put the carpet back in...it wont go all the way down...but yet it looks like its all down like it supposed to be but yet its not.
#2
RE: headliner... rear deck question
Cant you just pop it out from the other side without removing anything but if not you gona have to take out the visors as well as the dome light, and the handles on each passenger side, after everything is unscrewed, lay your seats as far as they can go back and down( it's easier to just take out the seats but takes more work) then at a angle tilt the top liner and pull it though the drivers side door, as for the rear deck your just gona have to work with it till it fits in the groves especially the seat belt part.
#3
RE: headliner... rear deck question
you musta pissed him off...
to make it easier also pull out the front pillar trim between the windshield and front doors...and if its a 4-door then the middle and rear pillar trim too....
if its a 2-door then pull out the whole back interior panel....then you wont get any creases
to remove the dome light...push the headliner against the ceiling and use a screwdriver to pop off the lens....then when you get the headiner down you have topull the wires off the opposite side of the liner....(its glued down)
to make it easier also pull out the front pillar trim between the windshield and front doors...and if its a 4-door then the middle and rear pillar trim too....
if its a 2-door then pull out the whole back interior panel....then you wont get any creases
to remove the dome light...push the headliner against the ceiling and use a screwdriver to pop off the lens....then when you get the headiner down you have topull the wires off the opposite side of the liner....(its glued down)